太平洋软件下载中心

Friday, April 29, 2011

subscribe this

http://labs.google.co.in/smschannels/subscribe/sreedharmadisetty

Thursday, April 28, 2011

Hi friends One important Notice.,.,.,Let me Share


http://labs.google.co.in/smschannels/subscribe/sreedharmadisetty
Here Those people who required Placement .,in the session 2011-12..for M.Techs they are preparing Data base of our marks and extra things.,.,.,.,

So Who are intrested they might have to go to the Placement cell.,.,
However,collect their forms.,.,and fill it with required information,.,.,


After that you need to submit your two passport size photo graphs,.,10th marks list,12th marks listm.,.,B.tech 8Th sem.,.marks list for proof of cgpa.,.,And If u Have any extra curricular activities,.,.,you also need to submit there.,..

If possible do tomoro it self ,.,I will also Do tomoro.,.,.,

ALL THE BEST FOR YOUR FUTURE,.,.,

Cordially,.,M.SREEDHAR

Monday, November 22, 2010

POWERELCTRONICS2ND

EXPEIMENT1:DETERMINE THE TRANSFER FUNCTION FOR SERVO MOTOR.

EXPERINET2:DETERMINE THE TRANSFER FUNCTION OF DC-MOTOR.

EXPERIMENT3:SPEED CONTROL I.M BY USING PWM INVERTER.

EXPRIMENT4:SPEED CONTROL OF SEPARATELY EXICTED MOTOR BY USING FULL WAVE RECTIFIER.

EXPERIMNET5:SPEED CONTROL OF SEPARATELY EXICTED MOTOR BY USING DUAL CONVERTER.

EXPERIMNT6:SPEED CONTROL OF S.E MOTOR ON ELECTRICAL LOAD BY ARMATURE VOLTAGE CONDITION METHOD .......

Monday, November 15, 2010

?????? ???? ??? ???? lu

1960-1979Publications

196719681969197019711972

1973197419751976197719781979

1967Publications

1.Lipo, T.A., P.C. Krause, “Stability Analysisof a Reluctance-Synchronous Machine,” IEEE Transactions on Power Apparatus and Systems, Aug.1967, vol. PAS-86, pp. 825-834.

top

1968Publications

1.Lipo, T.A., P.C. Krause, “Stability Analysisfor Variable Frequency Operation of Synchronous Machines,” IEEE Transactions on PowerApparatus and Systems, Jan. 1968, vol. PAS-87, no. l, pp. 227-234.

top

1969Publications

1.Lipo, T.A., P.C. Krause, “Stability Analysisof a Rectifier-Inverter Induction Motor Drive,” IEEE Transactions onPower Apparatus and Systems, Jan. 1969, vol. PAS-88, no. l, pp. 55-66.

2.Lipo, T.A.,P.C. Krause, H.E. Jordan, “Harmonic Torque andSpeed Pulsations in a Rectifier-Inverter Induction Motor Drive,” IEEE Transactions on Power Apparatus andSystems, May 1969, vol. PAS-88, no. 5, pp. 579-587.

3.Krause, P.C., T.A. Lipo, “Analysis andSimplified Representations of a Rectifier-Inverter Induction Motor Drive,” IEEE Transactions onPower Apparatus and Systems, May 1969, vol. PAS-88, no. 5, pp. 588-596.

4.Krause, P.C., T.A. Lipo, “Analysis andSimplified Representations of Rectifier-Inverter Reluctance-Synchronous Motor Drives,” IEEETransactions on Power Apparatus and Systems, June 1969, vol. PAS-88, no. 6, pp.962-970.

5.Nelson, R.H., T.A. Lipo, P.C. Krause, “Stability Analysisof a Symmetrical Induction Machine,” IEEE Transactions on Power Apparatusand Systems, Nov. 1969, vol. PAS-88, no. 11, pp. 1710-1717.

6.Lipo, T.A., “AnalogComputer Simulation of a Three-Phase Full-Wave Controlled Rectifier Bridge,” Proceedings of IEEE, Dec. 1969, vol.57, no. 12, pp. 2137-2146.

top

太平洋软件下载中心

1.Chattopadhyay A.K., T.A. Lipo, J. Hindmarsh, “Performance andAnalysis of Thyristor Commutator Motor,” Conference Record of ElectricalMachines in the Seventies, Dundee, Scotland, July 1-3, 1970.

top

1971 Publications

1.Lipo, T.A., “MultipleReference Frames Applied to Impedance Unbalances of Induction Machinery-The Open Circuited Stator Phase,” IEEEConference on Systems, Networks and Computers Conference Record, Ocztepec, Mexico, Jan. 21-23, 1971, pp. 312-316.

2.Lipo, T.A., “TheAnalysis of Induction Motors with Voltage Control by Symmetrically Triggered Thyristors,” IEEE Transactions on Power Apparatus and Systems, Mar.-Apr. 1971, vol. PAS-90, no. 2, pp. 515-525.

top

1972 Publications

1.Mayer, C.B., T.A. Lipo, “The Use ofSimulation in the Design of an Inverter Drive,” IEEE-IAS Annual Meeting Conference Record, 1972,pp. 745-752.

top

1973 Publications

1.Consoli, A., T.A. Lipo, “Modelling andSimulation of Induction Motors with Saturable Leakage Reactance,” IEEE Transactions onIndustry Applications, Jan.-Feb. 1984, vol. 20, no. 1,pp. 180-189.

top

1974 Publications

1.Wolfinger, J.F., T.A. Lipo, “StabilityImprovement of Inverter Driven Induction Motors by Use of Feedback,” IFAC Symposium on Control inPower Electronics and Electrical Drives, Conference Record, Oct. 7-9, 1974, pp. 237-251.

2.T.A. Lipo, A.B. Plunkett, “ANovel Approach to Induction Motor Transfer Functions,” IEEE Transactions on Power Apparatus and Systems,Sept.-Oct. 1974, vol. PAS-93, no. 5, pp. 1410-1418.

3.Kruase, P.C., D.P. Carroll, T.A. Lipo, “Applicationsof Analog and Hybrid Computation in Electric Power System Analysis,” Proceedings of IEEE, 1974, pp. 994-1009.

top

1975 Publications

太平洋软件下载中心1.Ong, C.M.,T.A. Lipo, “StabilityBehavior of a Synchronous-Reluctance Machine Supplied from a Current Source Inverter,” 1975IEEE-IAS Annual Meeting Conference Record, 1975, pp. 484-493.

太平洋软件下载中心2.Ong, C.M.,T.A. Lipo, “AnApproach to Closed Loop Design of a Current Source Inverter/Reluctance Motor Drive,” 1975 IEEE-IASAnnual Meeting Conference Record, 1975, pp. 494-500.

3.Lipo, T.A.,F.G. Turnbull, “Analysisand Comparison of Two Types of Square-Wave Inverter Drives,” IEEE Transactions on IndustryApplication, Mar.-Apr. 1975, vol. IA-11, no. 2, p. 137-147.

4.Lipo, T.A.,E.P. Cornell, “State-VariableSteady-State Analysis of a Controlled Current Induction Motor Drive,” IEEE Transactions onIndustry Applications, Nov.-Dec.1975, vol. IA-11, no. 6, pp. 704-712.

5.Lipo, T.A.,E.P. Cornell, “Modelingand Design of Controlled Current Induction Motor Drive Systems,” IEEE-IAS AnnualMeeting, Sept. 28–Oct. 2, 1975, pp. 612-620.

top

1976 Publications

1.Plunkett, A.B., T.A. Lipo, “New Methods ofInduction Motor Torque Regulation,” IEEE Transactions on Industry Applications, Jan.-Feb.1976, vol. IA-12, no. 1, pp. 47-55.

top

1977 Publications

1.Cornell, E.P., T.A. Lipo, “Modeling and Designof Controlled Current Induction Motor Drive Systems,” IEEE Transactions on IndustryApplications, July-Aug. 1977, vol. IA-13, no. 4, pp. 321-330.

2.Ong, C.M., T.A. Lipo, “Steady-StateAnalysis of a Current Source Inverter-Reluctance Motor Drive, Part I Analysis,” IEEE Transactionson Power Apparatus and Systems, July-Aug. 1977, vol. PAS-96, no. 4, pp.1145-1151.

3.Ong, C.M., T.A. Lipo, “Steady-StateAnalysis of a Current Source Inverter-Reluctance Motor Drive, Part II Experimental and AnalyticalResults,” IEEE Transactions on Power Apparatus and Systems, July-Aug. 1977, vol.PAS-96, no. 4, pp. 1152-1155.

4.Kerkman, R.J., P.C. Krause, T.A. Lipo, “Simulation of aSynchronous Machine with an Open Phase,” Electric Machines and Electromechanics, Apr.-June 1997, vol. 1, no. 3, pp. 245-254.

5.Kalsi, S.S., T.A. Lipo, “A Modal Approach tothe Transient Analysis of Synchronous Machines,” Electric Machines and Electromechanics, July-Sept. 1977, vol. 1, no. 4, pp. 337-354.

6.Lipo, T.A., “FluxSensing and Control of Static AC Drives by the Use of Flux Coils,” IEEE Transactions on Magnetics, Sept. 1977, vol. MAG-13, no. 5, pp. 1403-1408.

7.Plunkett, A.B., J.D. D’Atre, T.A. Lipo, “SynchronousControl of a Static AC Induction Motor Drive,” IEEE-IAS Annual Meeting, Los Angeles, CA, Oct. 2-6,1977.

8. A.B. Plunkett, T.A. Lipo, “Source ImpedanceEffects in theControl of Inverter-Induction Motor Drives,” (no apparent publisher)1977

top

1978 Publications

1.Muljadi, E., T.A. Lipo, D.W. Novotny, “PowerFactor Enhancement of Induction Machines by Solid State Excitation,” IEEE Transactions onPower Electronics, Oct. 1989, vol. 4, no. 4, pp. 409-418.

top

1979Publications

1.Lipo, T.A., “Performance Calculations of a Reluctance Motor Drive by dq Harmonic Balance,”IEEE Transactions on Industry Applications, Jan.-Feb 1979, vol. IA-15, pp. 25-35.

2.Lipo, T.A., T.A. Nondahl, “Pole-by-Pole d-q Model of a Linear Induction Machine,” IEEE Transactions on Power Apparatus and Systems, Mar.-Apr. 1979, vol. PAS-98, no. 2, pp. 629-642.

3.Lipo, T.A., “Analysis and Control of Torque Pulsations in Current Fed Induction Motor Drives,” Electric Machines and Electromechanics, Apr.-June 1979, vol. 3, pp.357-368.

4.Nondahl, T.A., T.A. Lipo, “Transient Analysis of a Linear Induction Machine Using the d-q Pole-by-Pole Model,” IEEETransactions on Power Apparatus and Systems, July-Aug. 1979, vol.PAS-98, no. 4, pp. 1366-1374.

5.Lipo, T.A., “Simulation of a Current Source Inverter Drive,” IEEE Transactions on IndustrialElectronics and Control Instrumentation, May 1979, vol. IECI-26, pp. 98-103.

6.Steigerwald, R.L., T.A. Lipo, “Analysis of a Novel Forced-Commutation Starting Scheme for a Load-CommutatedSynchronous Motor Drive,” IEEE Transactions on Industry Applications, Jan.-Feb.1979, vol. IA-15, pp. 14-24.

7.Plunkett, A.B., J. D. D'Atre, T.A.Lipo, “SynchronousControl of a Static AC Induction Motor Drive,” IEEE Transactions Industry Applications, July-Aug. 1979, vol. IA-15, no. 4,pp. 430-437.

8.Bose, B.K., T.A. Lipo, “Control and Simulation of a Current-Fed Linear Inductor Machine,” IEEETransactions on Industry Applications, Nov.-Dec. 1979, vol. IA-15, no. 6, pp.591-600.

1980-1989Publications

19801981198219831984

19851986198719881989

1980Publications

1.Kerkman, R.J., T.A. Lipo, W. G. Newman, J. E. Thirkell, “AnInquiry into Adjustable Speed Operation of a Pumped Hydro Plant, Part I -Machine Design and Performance,” IEEE Transactions on Power Apparatus and Systems, Nov.-Dec. 1980, vol.PAS-99, no. 5, pp. 1828-1837.

2.Kerkman, R.J., T.A. Lipo, W. G. Newman, J. E. Thirkell, “AnInquiry into Adjustable Speed Operation of a Pumped Hydro Plant, Part II - System Analysis,” IEEE Transactions onPower Apparatus and Systems, Nov.-Dec. 1980, vol. PAS-99, no. 5, pp.1838-1844.

3.Lipo, T.A, “Ad-q Model for Induction Machines,” InternationalConference on Electrical Machines, Sept. 15-17, 1980, Athens, Greece,pp. 860-867.

top

1981Publications

1.Consoli, A., T.A. Lipo, “Modelling and Simulationof Induction Motors with Saturable Leakage Reactance,” IEEE IAS AnnualMeeting, Philadelphia, PA, Oct. 5-9, 1981, pp.527-35. (see 1984-1).

2.Lipo, T.A., “Analog and Hybrid Computer Simulation of Static Power Conversion Systems,” U.S.-Japan Cooperative Seminar on Analysis and Design in Power Electronics, Kobe,Japan, Nov. 25-28, 1981, pp.55-66.

3.Novotny, D.W., T.A. Lipo, “Induction Machine Efficiency Improvement by Means of Voltage Control,”U.S.-Japan Cooperative Seminar on Analysis and Design in Power Electronics, Kobe,Japan, Nov. 25-28, 1981, pp.199-206.

4.Owen E.L., H. D. Snively, T.A. Lipo, “TorsionalCoordination of High Speed Synchronous Motors- Part II,” IEEE Transactions on Industry Applications, Nov.-Dec. 1981, vol. IA-17,pp. 572-580.

top

1982Publications

1.Consoli, A., T.A. Lipo, “Orthogonal Axis Models for Asymmetrically Connected Induction Machines,” IEEE Transactions on Power Apparatus & Systems, Dec. 1982, vol. PAS-101,no. 12, pp. 4518-4528.

2.Lipo, T.A., F.X. Wang, “Design and Performance of a Converter Optimized AC Machine,” IEEE IASAnnual Meeting, New York, NY, 1982, vol.1405, pp. 491-499.

3.Lipo, T.A, L.H. Walker, “Design and Control Techniques for Extending High Frequency Operation of a CSI InductionMotor Drive,” IEEE-IAS Annual Meeting, New York, NY,1982, vol. 1405 pp.698-706. (see 1983-3).

top

1983Publications

1.Lipo, T.A., “Hybrid Computer Simulation of ASCI Current Source Inverter,” Electric Machines &Power Systems, Jan.-Feb. 1983, vol. 8, no. 1, pp. 1-15.

2.Rowan, T.M., T.A. Lipo, “A Quantitative Analysis of Induction Motor Performance Improvement by SCRVoltage Control,” IEEE Transactions on Industry Applications, July-Aug. 1983, vol. IA-19, no. 4, pp. 545-553.

3.Lipo, T.A, L.H. Walker, “Design and Control Techniques for Extending High Frequency Operation of a CSI Induction Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct 1983, vol. IA-19, no. 5, pp. 744-753.

4.Wang, F.X,T.A. Lipo, “Analysis andSteady State Behavior of an Optimized AC Converter Machine,” IEEETransactions on Industry Applications, Aug 1983, vol. PAS-102,no. 8, pp 2734-2742.

5.He, Y.K.,T.A. Lipo, “SaturationEffects in the Stability Analysis of a VSI Induction Motor Drive,” IPEC Tokyo, 1983, vol. 1, pp. 181-192.

6.Lipo, T.A., L.H. Walker, “Design and Control Techniques for Extending High Frequency Operation of a CSI Induction Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct. 1983, vol. IA-19, pp. 744-753.

7.He, Y.K., T.A. Lipo, “Saturation Effects in the Stability Analysis of a VSI Induction Motor Drive,” Transactions of Electrical Engineers (Japan), Nov.-Dec. 1983, vol. 103,no. 11/12, pp. 117-124.

top

1984Publications

1.Consoli, A., T.A. Lipo, “Modelling and Simulation of Induction Motors with Saturable Leakage Reactance,”IEEE Transactions on Industry Applications, Jan.-Feb. 1984, vol. 20, no. 1,pp. 180-189.

2.Lipo, T.A., F.X. Wang, “Design and Performance of a Converter Optimized AC Machine,” IEEE Transactions on Industry Applications, July-Aug. 1984, vol. 20, no. 4, pp. 834-844.(see 1982-2).

3.He, Y.K,T.A. Lipo, “ComputerSimulation of an Induction Machine with Spatially Dependent Saturation,”IEEE Transactionson Power Apparatus and Systems, Apr. 1984, vol. 103, no. 4, pp. 707-714.

4.Lipo, T.A, “A CartesianVector Approach to Reference Frame Theory of AC Machines,” International Conference on Electrical Machines, Sept. 18-21, 1984, vol. 1, pp. 239-242.

5.Lipo, T.A, “Variable Speed Generator Technology Options for Wind Turbine Generators,” DOE/NASA Workshop on HAWT Technology, May 8-10, 1984.

6.Colby, R.S., T.A. Lipo, D.W. Novotny, “A State SpaceAnalysis of LCI Fed Synchronous Motor Drives in the Steady State,” IEEE-IAS Conference Record,1984,pp. 439-444.

7.Matsuo, T., T.A. Lipo, “A Rotor Parameter Identification Scheme for Vector Controlled Induction Motor Drives,”IEEE-IAS Conference Record, 1984, pp. 538-545. (see 1985-2).

8.Kirschen, D.S., D.W. Novotny, T.A. Lipo, “On-line Efficiency Optimization of a Variable Frequency Induction Motor Drive,”IEEE-IAS Conference Record, 1984,pp. 488-493. (see 1985-3).

9.Matsuo, T., T.A. Lipo, “Hybrid Computer Simulation of a Field Oriented Induction Motor Drive,”Fifth Brazilian/First Latin American Conference on Automatic Control,Sept.3-6, 1984.

top

1985Publications

1.Colby, R.S., T.A. Lipo, D.W. Novotny, “A State SpaceAnalysis of LCI Fed Synchronous Motor Drives in the Steady State,” IEEE Transactions on Industry Applications,July-Aug. 1985, vol. 21, no. 4, pp. 1016-1022.

2.Matsuo, T., T.A. Lipo, “A Rotor Parameter Identification Scheme for Vector Controlled Induction MotorDrives,” IEEE Transactions on Industry Applications, May-June 1985, vol. 21, no. 4,pp. 624-632.

3.Kirschen, D.S., D.W. Novotny, T.A. Lipo, “On-lineEfficiency Optimization of a Variable Frequency Induction Motor Drive,” IEEE Transactions on Industry Applications, May-June 1985, vol. 21, no. 3, pp. 610-616.

4.Muljadi, E., R. Schiferl, T.A. Lipo, “Induction MachinePhase Balancing by Unsymmetrical Thyristor Voltage Control,” IEEE Transactions on Industry Applications, May/June 1985.Vol. 21.No. 3.pp. 669-679.

5.Creer, W.H.,D.W. Novotny, T.A. Lipo, “Determination of Equivalent Circuits for Induction Machines with Skin Effect UsingTerminal Characteristics,” Electric Machines & Power Systems, 1985, vol.10, no. 5 & 6,pp. 379-394.

6.Sood, P.K., H. Rehaoulia, D.W. Novotny, T.A. Lipo,“A PulseWidth Controlled Three Switch Exciter for Induction Generators,” IEEE-IAS Conference Record, Oct. 6-11, 1985, pp. 653-661.

7.Deng, D., T.A. Lipo, “A Modified Control Method for Fast Response Current Source Inverter Drives,”IEEE-IAS Conference Record, 1985, pp. 662-671.

8.Matsuo T., T.A. Lipo, “Hybrid Computer Simulation of an Induction Motor Drive with Indirect FieldOriented Control,” CAMC Conference, MinneapolisMN, July 1985.

9.Sneyers, B., D. W. Novotny, T.A. Lipo, “Field Weakening inBuried Permanent Magnet AC Motor Drives,” IEEE Transactions on Industry Applications, Mar.-Apr. 1985, vol. IA-21,no. 2, 398-407.

top

1986Publications

1.Deng, D., T.A. Lipo, “A Modified Control Methodfor Fast Response Current Source Inverter Drives,” IEEE Transactions onIndustry Applications,July-Aug. 1986,vol.22,no. 4, pp. 653-665. (see 1985-7).

2.Lipo, T.A., K.C. Chang, “A New Approach to Flux and Torque Sensing in Induction Machines,” IEEE Transactions on Industry Applications,July-Aug. 1986, vol. 22, no. 4, pp. 731-737.

3.Muljadi, E., T.A. Lipo, D.W. Novotny, “Power FactorEnhancement of Induction Machines by Solid State Excitation,” International Conference on Evolution and ModernAspects of Induction Machines (ICEMAIM), July8-11, 1986, pp. 424-430.

4.Benzi, F., D. Zinger, T.A. Lipo, “A New Approach to Induction Motor Torque and Speed Control,”Conference on Applied Motion Control (CAMC), June 10-12, 1986, pp. 25-29.

5.Lipo, T.A., M.E. Kramer, “Measurement of Induction Motor Torque Pulsations Due to Inverter Supply,” NATO Conference on Electrical Machines,Louvain, Belguim,Aug 1986. Vibrations & Audible Noise in Electrical Machines, MartinusNijhoff, 1988,pp. 191-211.

6.Rowan, T.M., R.J. Kerkman, T.A. Lipo, “Operationof Naturally Sampled Current Regulators in the Transition Region,” IEEE-IAS Conference Record, 1986, vol. 1, pp. 91-98. (see 1987-2).

7.Wang, C.G., T.A. Lipo, D.W. Novotny, “An Automated Rotor Time Constant Measurement System for Indirect Field OrientedDrives,” IEEE-IAS Conference Record, 1986, vol. 1, pp. 140-146. (see 1988-2).

8.Sood, P.K., T.A. Lipo, “Power Conversion Distribution System Using a High Frequency AC Link,”IEEE-IAS Conference Record, 1986, vol. 1, pp. 533-541.

9.Carpenter, R. T.A. Lipo, “Electronic Adjustable Speed Drive Technology Synopsis,” APEC Conference Record, Dec.3-4, 1986,pp. 10-?.

10.Law, J.D., T.A. Lipo, “A Single PhaseInduction Motor Voltage Controller with Improved Performance,” IEEE Transactions on Power Electronics, Oct. 1986, vol. PE-1, no. 4, pp. 240-247.

top

1987Publications

1.Kirschen, D.S., D.W. Novotny, T.A. Lipo, “OptimalEfficiency Control of an Induction Motor Drive,” IEEE-PES Transactions on Energy Conversion, Mar. 1987, vol. EC-2, no. 1,pp. 70-76.

2.Rowan, T.M., R.J. Kerkman, T.A. Lipo, “Operation ofNaturally Sampled Current Regulators in the Transition Region,” IEEE Transactions on Industry Applications, July-Aug. 1987, vol. 23, no. 4, pp. 586-596.

3.Sood, P.K., T.A. Lipo, I.G. Hansen, “A Versatile PowerConverter for High Frequency Link Systems,” APEC, 1987, pp. 249-256.

4.Xu, L.Y., T.A. Lipo, “A Novel Converter Fed Reluctance Motor with High Power Density,” ElectricEnergy Conference (EECON ), Oct. 6-9 1987, vol. 1, pp. 125-134.Symposium on Electric Drives, Naples,Italy,1987, pp. 315-321.

5.Zai, L.C., T.A. Lipo, C.L. DeMarco, “An ExtendedKalman Filter Approach to Rotor Time Constant Measurement in PWM Induction Motor Drives,” IEEE-IAS ConferenceRecord, 1987, vol. 1, pp. 177-183.

6.Lipo, T.A,P.K. Sood, “Study of theGenerator/Motor Operation of Induction Machines in a High Frequency Link Space Power System,” Prepared for NASA-LewisResearch Center.

7.Moreira, J.C., T.A. Lipo, “Simulation of a Four Phase Switched Reluctance Motor Including the Effects ofMutual Coupling,” Beijing International Conference on Electrical Machines (BICEM), Aug. 10-14, 1987,Book I, pp. P-21-P-27.

8.Lipo, T.A., “Recent Progressin the Development of Solid State AC Motor Drives,” Electric EnergyConference and Instrumentation (EECON ‘87), Oct. 6-9, 1987, vol. I, pp. 125-134.

9.Profumo, F., D. Zinger, T.A. Lipo, “Design of aRobust Controller for Direct Field Oriented Control of an Induction Motor,” Electric Drives Conference Record, Cagliari, Italy, Sept. 15-17 1987, pp. 137-143.

10.Lipo, T.A., “ThePotential for High Temperature Superconducting AC and DC Motors,” Electric Machines and Power Systems, 1987, vol.13, no. 6, pp. 373-385.

top

1988Publications

1.Lipo, T.A., M.E. Kramer, “Measurement of Induction Motor Torque Pulsations Due to Inverter Supply,”Vibrations & Audible Noise in Electrical Machines, Martinus Nijhoff, 1988,pp. 191-211.

2.Wang, C.G., T.A. Lipo, D.W. Novotny, “An AutomatedRotor Time Constant Measurement System for Indirect Field Oriented Drives,” IEEE Transactions on Industry Applications, Jan.-Feb. 1988, vol. 24, no. 1, pp. 151-159.

3.Sood, P.K., T.A. Lipo, “Power Conversion Distribution System Using a High Frequency AC Link,” IEEE Transactions on Industry Applications, Mar.-Apr. 1988, vol. 24, no. 2,pp. 288-300.

4.Sood, P.K., T.A. Lipo, I.G. Hansen, “A VersatilePower Converter for High Frequency Link Systems,” IEEE Transactions on Power Electronics, Oct. 1988, vol. 3, no. 4, pp.383-390.

5.Lipo, T.A., “Recent Progressin the Development of Solid State AC Motor Drives,” IEEE Transactionson Power Electronics, Apr. 1988, vol. 3, no. 2, pp. 105-117.

6.Ojo, J.O., T.A. Lipo, “An Improved Model for Saturated Salient Pole Synchronous Motors,” IEEE-IASConference Record, 1988, vol. 1, pp. 222-230.

7.Sul, S.K., T.A. Lipo, “Field Oriented Control of an Induction Machine in a High Frequency Link PowerSystem,” IEEE-PESC Conference Record, Apr.11-14, 1988, vol. 2, pp. 1084-1090.

8.Zinger, D., F. Profumo, T.A. Lipo, D.W. Novotny, “A Direct FieldOriented Controller for Induction Motor Drives Using Tapped Stator Windings,” IEEE-PESC Conference Record, Apr. 11-14, 1988,vol. 2, pp. 855-861.

9.Sul, S.K., T.A. Lipo, “Design and Performance of a High Frequency Link Induction Motor Drive Operatingat Unity Power Factor,” IEEE-IAS Conference Record, Oct. 2-7, 1998,Part 2, pp. 308-313.

10.Oyama, J., F. Profumo, E. Muljadi, T.A. Lipo, “A DigitallyBased Voltage Controller for Correcting Induction Motor Phase Unbalance,” ICEM, Sept 12-14, 1988, vol. 2, pp.431-434.IEEE-IAS Conference Record, 1988, vol 1, pp. 578-583.

11.Schiferl, R., T.A. Lipo, “Power Capabilityof Salient Pole Permanent Magnet Synchronous Motors in Variable Speed Drive Applications,”IEEE-IAS Conference Record, Oct.2-7,1988, Part 1, pp. 23-31.

12.Ojo, J.O., A. Consoli, T.A. Lipo, “An Improved Modelof Saturated Induction Machines,” IEEE-IAS Conference Record, Oct. 1988, Part 1, pp. 222-230.

13.Oyama, J., F. Profumo, E. Muljadi, T.A. Lipo, “Design and Performance of a Digitally Based Voltage Controller for Correcting Phase Unbalance in Induction Machines,” IEEE-IAS Conference Record, Oct.207, 1988, Part I, pp. 578-583.

14.Lettenmaier, T., D.W. Novotny, T.A. Lipo, “Single PhaseInduction Motor with an Electronically Controlled Capacitor,” IEEE-IAS ConferenceRecord, Oct. 2-7,1988, Part 1, pp. 169-174.

15.Murai, Y., T.A. Lipo, “High FrequencySeries Resonant DC Link Power Conversion,” IEEE-IAS Conference Record, Oct. 2-7, 1988, Part I, pp. 772-779.

16.Xu, L.Y., T.A. Lipo, “Analysisof a Variable Speed Single-Salient Reluctance Motor Utilizing Only Two Transistor Switches,” IEEE-IAS Conference Record, Oct. 2-7, 1988, Part 1, pp. 38-43.

17.Lipo, T.A., “ResonantLink Converters:A New Direction in Solid StatePower Conversion,” International Conference on Electric Drives, Poiana-Brasov, Romania, Sept. 20-22, 1988, Book I-The Plenary Session, Tenth paper, pp. 87-97.Energia-Electrica,May 1990, vol. 67, no. 5, pp. 231-236.

18.Lipo, T.A., D.W. Novotny, “Induction MotorApplication Considerations for Adjustable Speed Drives,” EPRI Workshop onAdjustable Speed Drive Motors, Albany, NY, Aug. 23-24, 1988, pp. 10.

19.Lipo, T.A., “ThePotential for High Temperature Superconducting AC and DC Motors,” Electric Machines and Power Systems, 1988, vol. 13,pp. 373-385.

top

1989Publications

1.Muljadi, E., T.A. Lipo, D.W. Novotny, “Power FactorEnhancement of Induction Machines by Solid State Excitation,” IEEE Transactions on Power Electronics, Oct. 1989, vol.4, no. 4, pp. 409-418.

2.Moreira, J.C., T.A. Lipo, “Simulation of a Four Phase Switched Reluctance Motor Including the Effects of MutualCoupling,” Electric Machines & Power Systems, 1989, vol. 16, no. 4, pp.281-299. (see 1987-7).

3.Ojo, J.O., T.A. Lipo, “An Improved Model for Saturated Salient Pole Synchronous Motors,” IEEE Transactions on Energy Conversion, March 1989, vol. 4, no. 1, pp.135-142.

4.Schiferl, R., T.A. Lipo, “Core Loss in Buried Permanent Magnet Synchronous Motors,” IEEETransactions on Energy Conversion, June 1989, vol. 4, no. 2, pp. 279-284.

5.Udayagiri, M.R., T.A. Lipo, “Simulation of Inverter Fed Induction Motors Including Core Losses,” IECONConference Record, Nov. 6-10,1989, vol. 1, pp. 232-237.

6.Ojo, J.O., V. Ostovic, J.C. White, T.A. Lipo, “Measurement andComputation of Starting Torque Pulsations of Salient Pole Synchronous Motors,” IEEE Transactions on Energy Conversion, Mar. 1990, vol. 5, no. 1, pp. 176-182.

7.Blasko, V., T.A. Lipo, J.C. Moreira, “A New FieldOriented Controller Utilizing Spatial Position Measurement of Rotor End Ring Current,” IEEE-PESC Conference Record,1989, vol. 1, pp. 295-300.

8.Sul, S.K., I.Alan, T.A. Lipo, “PerformanceTesting of a High Frequency Link Converter for Space Station Power Distribution Systems,” IEEEIntersociety Energy Conversion Engineering Conference (IECEC), Washington D.C., Aug. 6-11, 1989, vol. 1, no.899362, pp. 617-623.

9.Lipo, T.A., H.A. Toliyat, “Feasibility Study of a Converter Optimized Induction Motor,” EPRI RP2624-02.

10.Murai, Y., S. Mochizuki, P. Caldeira, T.A. Lipo, “Current Pulse Control of High Frequency Series Resonant DC Link Power Converter,”IEEE-IAS Conference Record, San Diego, CA, Sept. 1989, Part 1, pp. 1023-1030.

11.Zinger, D.S., T.A. Lipo, D.W. Novotny, “Using InductionMotor Stator Windings to Extract Speed Information,” IEEE-IAS AnnualMeeting Conference Record, San Diego,CA, Oct.1989, Part 1, pp. 213-218.

12.Holmes, D.G., T.A. Lipo, “Implementation ofa Controlled Rectifier Using AC-AC Matrix Converter Theory,” IEEE-PESC Conference Record,” June 26-29, 1989,pp. 353-359.

13.Oyama, J., T. Higuchi, E. Yamada, T. Koga,T.A. Lipo, “New ControlStrategy for Matrix Converter,” IEEE-PESC Conference Record, June 26-29, 1989, vol. 1, pp. 360-367.

14.Sul S.K., F. Profumo, G.H. Cho, T.A. Lipo, “MCTs and IGBTs: A Comparison of Performance in Power Electronic Circuits,” IEEE Power Electronics Specialists' Conference, vol. 1, June 26-29, 1989, pp. 163-169.

太平洋软件下载中心

1.Sul, S.K., T.A. Lipo, “Field OrientedControl of an Induction Machine in a High Frequency Link Power System,” IEEE Transactions onPower Electronics, Oct. 1990, vol. 5, no. 6, pp. 436-445.

2.Zinger, D., F. Profumo, T.A. Lipo, D.W. Novotny, “A Direct FieldOriented Controller for Induction Motor Drives Using Tapped Stator Windings,” IEEETransactions on Power Electronics, Oct. 1990, vol. 5, no. 4, pp. 446-453.

3.Sul, S.K., T.A. Lipo, “Design andPerformance of a High Frequency Link Induction Motor Drive Operating at Unity Power Factor,” IEEE Transactions on Industry Applications, May-June 1990, vol. 26, no. 3,pp. 434-440.

4.Schiferl, R., T.A. Lipo, “Power Capabilityof Salient Pole Permanent Magnet Synchronous Motors in Variable Speed Drive Applications,”IEEE Transactions on Industry Applications, Jan.-Feb.1990, vol. 26, no. 1, pp. 115-123.

5.Ojo, J.O., A. Consoli, T.A. Lipo, “An ImprovedModel of Saturated Induction Machines,” IEEE Transactions on Industry Applications, Mar.-Apr.1990, vol. 26, no. 2, pp. 212-221.

6.Oyama, J., F. Profumo, E. Muljadi, T.A. Lipo, “Design andPerformance of a Digitally Based Voltage Controller for Correcting Phase Unbalance in Induction Machines,” IEEETransactions on Industry Applications, May-June 1990, vol. 26, no. 3,pp. 425-433.

7.Xu, L.Y., T.A. Lipo, “Analysis of aVariable Speed Single-Salient Reluctance Motor Utilizing Only Two Transistor Switches,” IEEETransactions on Industry Applications, Mar.-Apr. 1990, vol. 26, no. 2, pp. 229-236.

8.Caldeira, P., T.A. Lipo, Y. Murai, S. Mochizuki, “Design and Controlof a Series Resonant DC Link Power Converter Drive,” IPEC, Apr. 2-6, 1990, vol. 1, pp. 397-404.

9.Fan, F., S. Ji, T.A. Lipo, “A New Energy Recovery Scheme for Doubly fed, Variable Speed InductionMotor Drives,” IEEE International Conference on Applications of Industrial Electronic Systems, May 13-17, 1990, pp. 106-110.

10.Blasko, Y., T. Matsuo, J.C. Moreira, T.A. Lipo, “A New Direct FieldOriented Controller Employing Rotor End Ring Current Detection,” IEEE-PESC Conference Record, 1990, vol. 2,pp. 599-605.

11.Moreira, J.C., T.A. Lipo, “A New Method for Rotor Time Constant Tuning in Indirect Field Oriented Control,” IEEE-PESCConference Record, 1990, vol. 2, pp. 573-580.

12.Marschke, K.W., P. Caldeira, T.A. Lipo, “Utilization of theSeries Resonant DC link as a Conditioning System for SMES,” IEEE-PESC Conference Record, June 10-15, 1990, vol. I, pp. 266-272.

13.Liang, F., L. Xu, T.A. Lipo, “d-q Analysis of a Variable Speed Doubly AC Excited Reluctance Motor,”Electric Machines and Power Systems, 1991, vol 19, no 2, pp. 125-138.

14.Fahim, A., T.A. Lipo, “Calculations of Electromagnetic Fields Including End Effect Using Fourier TransformMethod,” ICEM, Aug. 13-15, 1990, vol. 2, pp. 751-756.

15.Jensen, C.C., T.A. Lipo, F. Profumo, “A Low Loss PermanentMagnet Brushless DC Motor Utilizing Tape Wound Amorphous Iron,” IEEE-IAS Conference Record, Oct. 7-12, 1990,Part I.

16.Caldeira, P., K.W. Marschke, T.A. Lipo, Y. Murai, “Utilization of theSeries Resonant DC Link as a DC Motor Drive,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part 2, pp. 1208-1214.

17.Moreira, J., T.A. Lipo, “Modeling of Saturated AC Machines Including Airgap Flux Harmonic Components,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part 1, pp. 37-44.

18.Xu, L.,X. Xu, D.W. Novotny, T.A. Lipo, “Vector Control ofSynchronous Reluctance Motor Including Saturation and Iron Loss,” IEEE-IASConference Record, 1990, vol. 1, pp. 359-364.

19.Novotny, D.W, R.D. Lorenz, T.A. Lipo, D.M. Divan, “The Electric Machinesand Power Electronics Laboratory at the University of Wisconsin,” International Conference on ElectricalMachines (ICEM), Boston MA, August 13-15, 1990, pp. 305-308.

20.Moreira, J.C., T.A. Lipo, “Direct Field Orientation Control Using the Third Harmonic Component of theStator Voltage,” International Conference on Electrical Machines (ICEM),Boston MA, Aug. 13-15, 1990, pp.1237-1242.

21.Toliyat, H., L. Xu, T.A. Lipo, “A Five Phase Reluctance Motor with High Specific Torque,” IEEE-IASConference Record,Oct. 7-12, 1990, Part 1, pp. 207-213.

22.Mertens, A., P. Caldeira, T.A. Lipo, “Characterization ofGTO’s Under Different Modes of Zero Current Switching,” IEEE-PESC Conference Record,” June 24-27, 1991,pp. 444-452.

23.Ojo, J.O, V. Ostovic, T.A. Lipo, J.C. White, “Measurement andComputation of Starting Torque Pulsations of Salient Pole Synchronous Motors,” IEEE Transactions on EnergyConversion, Mar. 1990, vol. 5, no. 1, pp. 176-182.

24.Lipo, T.A., “Resonant Link Converters: A New Direction in Solid State Power Conversion,”L'Energia Elettrica, 1990, vol. LXVII, no. 5, pp. 231-236.

25.T.A. Lipo, F. Benzi, “Azionamenti perl’industria: nuoverealizzioni,” April 1990.

太平洋软件下载中心

  1. Lettenmaier,T., D.W.Novotny, T.A. Lipo, “Single PhaseInduction Motor with anElectronically Controlled Capacitor,IEEE Transactions on IndustryApplications, Jan-Feb 1991, vol. 27, no 1, pp 38-43.
  2. Moreira,J.C, V. Blasko, T.A. Lipo,“SimpleEfficiency Maximizerfor an Adjustable Frequency Induction Motor Drive,” IEEETransactionson Industry Applications, Sept.-Oct. 1991, vol. 27, no. 5, pp. 940-946.
  3. Xu, L., F. Liang, T.A. Lipo, “Transient Modelof a Doubly ExcitedReluctance Motor,” IEEE Transactions on Energy Conversion, Mar.1991,vol. 6, no 1, pp. 126-133.

4.Xu, L.,X.Xu, D.W. Novotny, T.A. Lipo,“Vector Controlof Synchronous Reluctance Motor Including Saturation and Iron Loss,” IEEE Transactions on Industry Applications, Sept.-Oct. 1991, vol. 27, no. 5, pp. 977-985.

5.Toliyat, H.A., T.A. Lipo, J.C. White, “Analysisof a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications Part I: Motor Analysis,” IEEE Transactions on Energy Conversion, Dec. 1991, vol.6, no 4, pp. 679-683.

6.Toliyat, H.A., T.A. Lipo, J.C. White, “Analysisof a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications Part II: MotorDesign and Performance,” IEEE Transactions on Energy Conversion, Dec. 1991,vol. 6, no 4, pp. 684-692.

7.Lipo, T.A, “Novel ReluctanceMachine Concepts for Variable Speed Drives,” 6th Mediterranean Electrotechnical Conference, MELECON, New York, May 1991, vol. I, pp. 34-43.

8.Fahim, A.A., T.A. Lipo, D.W. Novotny, “EquivalentCircuit Model for Super Conducting Machine Based on Three Dimensional Field Solution,” SM100 Conferenceon Evolution and Modern Aspects of Synchronous Machines, Aug. 27-29, 1991,Part 3, pp. 803-805.

9.Lipo, T.A, “SynchronousReluctance Machines - A Viable Alternative for AC Drives,” SM100 Conference on Evolution and Modern Aspects of Synchronous Machines,” Aug. 27-29, 1991,Part 2, pp. 475-479.

10.Lipo, T.A, “Synchronous Reluctance Machines - A Viable Alternative for AC Drives,” Electric Machines and Power Systems, Nov.-Dec. 1991, vol. 19, no. 6, pp. 659-71.

11.Murai, Y., S.G. Abeyratne, T.A. Lipo, P. Caldeira,“Dual-flow PulseTrimming Concept for a Series Resonant DC Link Power Conversion,” IEEE-PESC Conference Record, June 24-27, 1991,pp. 254-260.

12.Murai, Y., S.G. Abeyratne, T.A. Lipo, P. Caldeira,“Current PeakLimiting for a Series Resonant DC Link Power Conversion Using a Saturable Core,”EPE/ Fourth European Power Electronics Conference, Sept. 3-6, 1991, vol. 2,pp. 8-12. ElectricMachines and Power Systems. Jan.-Feb. 1996, vol. 26 no. 1, pp. 51-63.

13.Moreira, J.C., K.T. Hung, T.A. Lipo, R.D. Lorenz, “ASimple and Robust Adaptive Controller for Detuning Correction in Field Oriented Induction Machines,” InProceedings of IEEE-IAS Conference Record, 1991 , pp. 397-403.

14.Muljadi, E., Y. Zhao, T.H. Liu,T.A. Lipo, “Adjustable ACCapacitor for a Single Phase Induction Motor,” IEEE-IAS Conference Record, Sept. 28-Oct. 4, 1991, Part 1, pp. 185-190.

15.Liu,T.H., J.R. Fu, T.A. Lipo, “A Strategy forImproving Reliability of Field Oriented Controlled Induction Motor Drives,” IEEE-IAS Conference Record, 1991, Part 1, pp. 449-455.

16.Hava, A., V. Blasko, T.A. Lipo, “A Modified C-dumpConverter for Variable Reluctance Machines,” IEEE-IAS Conference Record, Sept. 28-Oct. 4, 1991, Part 1, pp. 886-891.

17.Toliyat, H., M. Rahimian, T.A. Lipo, “DQ Modeling of FivePhase Synchronous Reluctance Machines Including Third Harmonic of Airgap MMF,” IEEE-IAS Conference Record, Sept. 28-Oct. 4, 1991, Part 1, pp. 231-237.

18.Skinner, J., T.A. Lipo, “Input Current Shaping in Brushless DC Motor Drives Utilizing Inverter Current Control,” IEEConference on Electric Machines and Drives, Sept. 1991, pp. 121-125.

19.Murai, Y., H. Nakamura, T.A. Lipo, M.T. Aydemir, “Pulse-splitConcept in Series Resonant DC Link Power Conversion for Induction Motor Drives,” IEEE-IAS Conference Record,1991, pp. 776-781.

20.Divan, D.M., R.H. Lasseter, T.A. Lipo, R.D. Lorenz, D.W. Novotny, “The IndustrialConsortium:A Format for University-IndustryInteraction,” American Society for Engineering Education (ASEE) 53rd Annual Meeting,Oct. 6-8, 1991.

21.F. Caricchi,F. Crescimbini, A. DiNapoli, O. Honorati, T.A. Lipo, G. Noia,E. Santini, “Development of an IGBTInverter Driven Axial-Flux PM Synchronous Motor Drive,” European PowerElectronics Conference, Sept. 3-6, 1991, vol. 3, pp. 482-487.

22.Liang, F., L.Y. Xu, T.A. Lipo,“d-q Analysis of aVariable Speed Doubly AC Excited Reluctance Motor,” Electric Machines and Power Systems, 1991, vol. 19, no. 2,pp. 125-138.

23.Liao, F., S. Ji, T.A. Lipo, “A New Energy RecoveryScheme for Doubly Fed, Variable Speed Induction Motor Drives,” IEEETransactions on Industry Applications, July-Aug. 1991, vol. 27, no.4, pp. 728-733.

1992 Publications

1.Zai, L.C., T.A. Lipo, C.L. DeMarco, “An Extended Kalman Filter Approach to Rotor Time ConstantMeasurement in PWM Induction Motor Drives,” IEEE Transactions on IndustryApplications, Jan.-Feb. 1992, vol. 28, no. 1, pp. 96-104.

2.Murai, Y., T.A. Lipo, “High FrequencySeries Resonant DC Link Power Conversion,” IEEE Transactions on Industry Applications, Nov.-Dec. 1992, vol. 28, no. 6, pp. 1277-1285.

3.Holmes,D.G., T.A. Lipo, “Implementationof a Controlled Rectifier Using AC-AC Matrix Converter Theory,” IEEE Transactions on Power Electronics, Jan. 1992, vol. 7, no. 1, pp. 240-250.

4.Marschke, K.W., P. Caldeira, T.A. Lipo, “Utilization of the Series Resonant DC link as a Conditioning System for SMES,” IEEETransactions on Power Electronics, July 1992, vol. 7, no. 3, pp. 506-513.

5.Jensen, C.C., T.A. Lipo, F. Profumo, “A Low LossPermanent Magnet Brushless DC Motor Utilizing Tape Wound Amorphous Iron,” IEEE-IAS ConferenceRecord, Oct. 7-12, 1990, Part I.

6.Moreira, J., T.A. Lipo, “Modeling ofSaturated AC Machines Including Airgap FluxHarmonic Components,” IEEE Transactions on Industry Applications, Mar.-Apr. 1992, vol. 28, no. 2, pp. 343-349.

7.Toliyat, H., L. Xu, T.A. Lipo, “A Five Phase Reluctance Motor with High Specific Torque,” IEEE Transactions onIndustry Applications, May-June 1992, vol. 28, no. 3, pp. 659-667.

8.Moreira, J.C., K.T. Hung, T.A. Lipo, R.D. Lorenz, “ASimple and Robust Adaptive Controller for Detuning Correction in Field Oriented Induction Machines,” IEEETransactions on Industry Applications, Nov.-Dec. 1992, vol. 28, iss. 6, pp.1359-1366.

9.Hava, A., V. Blasko, T.A. Lipo, “A Modified C-dump Converter for Variable Reluctance Machines,” IEEE Transactions on Industry Applications, Sept.-Oct. 1992, vol. 28, no. 5, pp. 1017-1022.

10.Lipo, T.A., D.M. Divan, “Resonant Links:A New Family of Converter Topologies for Solid State Power Conversion,” ABB Symposium on Power Semiconductor Devices and Circuits, Sept. 26-27, 1992, pp. 291-315.

11.Bhattacharya, S., T.A. Lipo, H.A. Toliyat, M.M. Rahimian, “Transient Analysis of Induction Machines Under Internal Faults Using WindingFunctions,” International Conference on Electrical Rotating Machines (ELROMA),Jan.15-16, 1992, vol. III, pp. 1-13.

12.Liao, Y., T.A. Lipo, “A New Doubly SalientPermanent Magnet Motor for Adjustable Speed Drives,” SPEEDAM, May 19-21, 1992, pp. 415-420.

13.Lipo, T.A., J.D. Law, A. Chertok, “Design andPerformance of the Field Regulated Reluctance Machine,” IEEE-IAS Conference Record, 1992, vol. 1, pp. 234-241.

14.Ledwich, G., E. da Silva, T.A. Lipo, “Soft SwitchedNotching Current Source Inverters,” IEEE-PESC, June 29-July 3, 1992, vol. II, pp.1093-1097.

15.Lipo, T.A., M. Aydemir, E. da Silva,G. Ledwich, “Impact of controlStrategy on Component Ratings of Series Resonant DC Link Current Converter,” ACEMP’92/Aegean Conference on ElectricalMachines and Power Electronics, May 27-29, 1992, pp. 511-516.

16.Lipo, T.A., Y. Liao, “Effect of SaturationThird Harmonic on the Performance of Squirrel-Cage Induction Machines,” International Conference on Electrice Machines, Sept.15-17, 1992, vol. II, pp. 278-282.

17.Park, S.S., T.A. Lipo, “New Series Resonant Converter for Variable Reluctance Motor Drive,” IEEE-PESC Conference Record, June 29-July 3, 1992, vol. 2, pp. 833-838.

18.Lipo, T.A., J.R. Fu, “Improving Reliability of Induction Motor Drives by Means of Fast Acting CurrentRegulation,” 1st European Conference on Reliability, Standardization andCertification of Industrial Electric Drives, May15-27, 1992.

19.Liang, F.; T.A. Lipo, “A New VariableReluctance Motor Utilizing Auxiliary Commutation Winding,” IEEE IAS Annual Meeting Conference Record, Oct. 4-9, 1992, vol. 1, pp. 219 – 225.

20.Alan, I., T.A. Lipo, “A Completely Isolated Three-phase to Three-phase Induction Motor/Induction Generator PowerConversion System,” IEEE-IAS Annual Meeting Conference Record, Oct. 4-9 1992,vol.1, pp. 978 – 985.

21.Moreira, J., L. Kreindler, A. Testa,T.A. Lipo, “Direct FieldOrientation Controller Using the Stator Phase Voltage Third Harmonic,” IEEE-IAS Conference Record, 1992, vol. 1, pp. 508-514.

22.da Silva, E., G. Ledwich, M. Aydemir, T.A. Lipo,“Pulse WidthModulated Series Resonant Converter,” IEEE-IAS Conference Record, Oct. 4-9, 1992, vol. I, pp. 744-749.

23.Liao, Y., F. Liang., T.A. Lipo, “A Novel PermanentMagnet Motor with Doubly Salient Structure,” IEEE IAS Conference Record, Oct. 1992, vol I, pp. 308-314.

24.Caricchi, F., F. Crescimbini, T.A. Lipo, E. Santini,“InnovativeInverter Topology for Concentrated Winding PM Motor Drives,” IEEE-PESCConference Record, 1992, vol. 2, pp. 964-972.

25.da Silva, E., G. Ledwich, T.A. Lipo, C.B. Jacobina,“DC Link NotchingCurrent Inverter for Soft Communication,” CongressoBrasileiro de Automica,Soc. Bras. De Automatica, Brazilian, Sept. 1992, pp. 80-85.

1993 Publications

1.Moreira,J.C., T.A. Lipo, “A New Method forRotor Time Constant Tuning in Indirect Field Oriented Control,” IEEE Transactions on Power Electronics, Oct. 1993, vol. 8, no. 4, pp. 626-631.

2.Caldeira, P., K.W. Marschke, T.A. Lipo, Y. Murai, “Utilization of the Series Resonant DC Link as a DC Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct. 1993, vol. 29, no. 5,pp. 949-958.

3.Muljadi, E., Y. Zhao, T.H. Liu, T.A. Lipo, “Adjustable ACCapacitor for a Single Phase Induction Motor,” IEEE Transactions on Industry Applications,May-June 1993, vol. 29, no. 3, pp. 479-485.

4.Liu, T.H., J.R. Fu, T.A. Lipo, “A Strategy forImproving Reliability of Field Oriented Controlled Induction Motor Drives,” IEEE Transactions on Industry Applications, Sept.-Oct. 1993, vol. 29, no. 5, pp. 910-918.

5.Kutkut, N.H.,H.M. Cherradi, T.A. Lipo,“Analysis ofInduction Motor with Voltage Control by Symmetrically Triggered Thyristors using Quasi-rotating Reference Frame,” IMACS TCI-93, July 7-9, 1993, pp.13-21.

6.Zhao, Y., Y. Li, T.A. Lipo, “Force CommutatedThree-Level Boost Type Rectifier,” IEEE-IAS Conference Record, Oct. 1993, vol. II, pp. 771-777.

7.Li, H..Y., F. Liang,Y. Zhao, T.A. Lipo, “A Doubly Salient Doubly Excited Variable Reluctance Motor,” IEEE-IASConference Record, Oct. 1993, vol. I, pp. 137-143.

8.Liao, Y.; T.A. Lipo, “Sizing and Optimal Design of Doubly Salient Permanent Magnet Motors,” IEE 6th International Conference on Electric Machines and Drives, Sept. 8-10,1993, pp. 452-456.

9.Shakal, A., Y. Liao, T.A. Lipo, “A Permanent Magnet ACMachine Structure with True Field Weakening Capability,” IEEE International Symposium on IndustryElectronics, June 1-3, 1993, pp. 19-24.

10.Kreindler, L., A. Testa, T.A. Lipo, “Position Sensorless Synchronous Reluctance Motor Drive Using the Stator Phase Voltage Third Harmonic,” IEEE-IASConference Record, 1993, vol. 1, pp. 679-686.

11.Hava, A., J. Wacknov, T.A. Lipo, “New ZCS ResonantPower Converter Topologies for Variable Reluctance Machine Drives,” IEEE-PESC, June 20-24, 1993, pp. 432-439.

12.Matsuo, T., T.A. Lipo,“Field OrientedControl of Synchronous Reluctance Machine,” IEEE-PESC Conference Record, 1993, pp. 425-431.

13.Fahim, A.A., T.A. Lipo,C.J. Slavic, “Electromagnetic Modelfor Evaluation of Flux Harmonics and Resulting Vibrations in Induction Motors,”IEE 6th International Conference on Electrical Machines and Drives, Sept. 8-10,1993, pp. 540-545.

14.Dostal, Z., T.A. Lipo, B.J .Chalmers, “Influence of Current Wave Shape on Motoring Performance of the Slotless Permanent Magnet Machine Torus,” IEE 6th International Conference on Electric Machines and Drives, Sept. 8-10, 1993,pp. 376-380.

15.Nakamura, H., Y. Murai, T.A. Lipo, “Quasi Current Resonant DC Link AC/AC Converter,” IEEE Power ElectronicsSpecialists Conference Record, June20-24,1993, pp. 279–284.

16.Arefeen, M.S., M. Ehsani, T.A. Lipo,“Elimination ofDiscrete Position Sensor for Synchronous Reluctance Motor,” IEEE-PESC Conference Record, 1993, pp. 440-445.

17.da Silva, E., G. Ledwich, T.A. Lipo,C.B. Jocabina, “DC Link Notching Current Inverter with Soft Commutation,” IEEE-PESC ConferenceRecord, June 1993.

18.Osama, M., K. Sakkoury, T.A. Lipo, “Transient BehaviorComparison ofSaturated Induction Machine Models,” IMACS-TCI-93 Computational Aspects ofElectromechanical Energy Converters and Drives, July7-9, 1993, pp. 577-580.

19.Fu, J.R., T.A. Lipo, “A Strategy toIsolate the Switching Device Fault of a Current Regulated Motor Drive,” IEEE-IAS Conference Record, Oct. 2-8, 1993, vol. II, pp. 1015-1020.

20.Muljadi; E.,T.A. Lipo, “Series Compensated PWM Inverter with Battery Supply Applied to an IsolatedInduction Generator,” IEEE-IAS Conference Record, 1993, vol. 2, pp. 1392-1400.

21.Fu, J.R., T.A. Lipo, “Disturbance FreeOperation of a Multiphase Current Regulated Motor Drive with an Opened Phase,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 637-644.

22.Matsuo, T., T.A. Lipo,“Current Sensorless Field Oriented Control of Synchronous Reluctance Motor,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 672-678.

23.Chen, S., E. Zhong, T.A. Lipo, “A New Approach to Motor Condition Monitoring in Induction Motor Drives,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 645-650.

24.Wallace, R., T.A. Lipo, J. Tapia, L. Moran, “Design andConstruction of Permanent Magnet Axial Flux Synchronous Generator,” X CongressoChileno de IngenieriaElectrica, Nov. 1993.

25.Sun, C., X. Luo, T.A. Lipo, “Indirect FieldOriented Control of Induction Machine Utilizing a Reactive Power Perturbation Scheme,” IMACS-TCI-93 Computational Aspects of Electromechanical Energy Converters and Drives, Montreal, Canada, July 7-9, 1993, pp. 403-407.

26.Arefeen, M.S., M. Ehsani, T.A. Lipo,“An Analysis ofthe Accuracy of Indirect Shaft Sensor for Synchronized Reluctance Motor,” IEEE - IAS Annual Meeting Conference Record, Oct. 2-8, 1993, vol. 1, pp. 695-700.

27.Luo, X., T.A. Lipo, Y. Liao,H. Toliyat, A. El-Anatably,“Multiple CoupledCircuit Modeling of Induction Machines,” IEEE-IAS Conference Record, Oct. 1993, vol I, pp.203-210.

28.Zhong, E., S. Chen, T.A. Lipo, “Improvements in EMI Performance of Inverter-Fed Motor Drives,” APEC ConferenceRecord, 1994, vol. 2, pp. 608-614.

29.Toliyat H.A., M.M. Rahimian, T.A. Lipo,“Analysis andModeling of Five Phase Converters for Adjustable Speed Drive Applications,” European Power Electronics Conference(EPE), Brighton, England, Sept. 1993, vol. 5, pp. 194-199.

30.Yoshida, M., H. Soebagia, Y. Murai, T.A. Lipo,“Series Resonant DCLink Dual Converter as a DC Motor Drive,” European Power Electronics Conference (EPE), Brighton, England, Sept. 1993, vol. 5, pp. 188-193.

31.da Silva, E.R.C., G. Ledwich, M.T. Aydemir, T.A. Lipo, “A PWM High Frequency Series Resonant DC Link Converter and Its Utilization as a DC MotorDrive,” 2nd Brazilian Power Electronics Conference (COBEP93), Uberlandia MG, Brazil, Nov. 29 – Dec. 2, 1993.

32.Liao, Y., T.A. Lipo, “Effect of SaturationThird Harmonic on the Performance of Squirrel-Cage Induction Machines,”Electric Machines and Power Systems, Mar.-Apr., 1993, vol. 22, no. 2, pp.155-173.

1994 Publications

  1. Blasko,Y., T. Matsuo, J.C. Moreira, T.A. Lipo, “FieldOriented Control of Induction Machines Employing Rotor End RingCurrentDetection,” IEEE-PESC Conference Record, 1990, vol. 2, pp.599-605.

2.Mertens, A., P. Caldeira, T.A. Lipo, “Characterization ofGTO’s Under Different Modes of Zero Current Switching,” IEEE Transactions on Power Electronics,May 1994, vol. 9, no 3, pp. 338-345.

3.Murai, Y., H. Nakamura, T.A. Lipo, M.T. Aydemir, “Pulse-split Conceptin Series Resonant DC Link Power Conversion for Induction Motor Drives,” IEEE Transactions onIndustry Applications, Jan.-Feb. 1994, vol. 30, no 1, pp. 45-51.

4.Liao, Y., T.A. Lipo, “A New Doubly SalientPermanent Magnet Motor for Adjustable Speed Drives,” Electric Machines and Power Systems,Mar.-Apr. 1994, vol. 22, no. 2, pp. 259-70.

5.Lipo, T.A., J.D. Law, A. Chertok, “Design andPerformance of the Field Regulated Reluctance Machine,” IEEE Transactions on Industry Applications, Sept.-Oct.1994, vol. 30, no 5, pp. 1185-1192.

6.Lipo, T.A., Y. Liao, “Effect of Saturation Third Harmonic on the Performance of Squirrel-Cage Induction Machines,” Electrical Machines and Power Systems, Mar.-Apr. 1994,vol. 22, no. 2, pp. 155-73.

7.Liang, F.; T.A. Lipo, “A New VariableReluctance Motor Utilizing Auxiliary Commutation Winding,” IEEE Transactions on Industry Applications,Mar.-Apr. 1994, vol. 30, no 2, pp. 423-432.

8.Alan, I., T.A. Lipo, “Control of a Polyphase InductionGenerator/Induction Motor Power Conversion System Completely Isolated from the Utility,” IEEE Transactions on Industry Applications, May-June 1994, vol. 30, no 3, pp. 636-647.

9.Moreira, J., L. Kreindler, A. Testa, T.A. Lipo, “Direct FieldOrientation Controller Using the Stator Phase Voltage Third Harmonic,” IEEE Transactions on Industry Applications, Mar.-Apr. 1994, vol. 30, no. 2, pp. 441-447.

10.Caricchi, F., F. Crescimbini, T.A. Lipo, E. Santini, “Converter Topology with Load-neutral Modulation for Trapezoidal-EMF PM Motor Drives,” IEEETransactions on Power Electronics, Mar. 1994, vol. 9, no 2, pp. 232-239.

11.Nakamura, H., Y. Murai, T.A. Lipo, “Quasi CurrentResonant DC Link AC/AC Converter,” IEEE Transactions on Power Electronics, Nov. 1994, vol. 9, no 6, pp.594-600.

12.Matsuo, T., T.A. Lipo, “Rotor DesignOptimization of Synchronous Reluctance Machine,” IEEE Transactions on Energy Conversion, June1994, vol. 9, no 2, pp. 359-365.

13.Muljadi; E., T.A. Lipo, “Series CompensatedPWM Inverter with Battery Supply Applied to an Isolated Induction Generator,” IEEE Transactions on Industry Applications, July-Aug. 1994, vol .30, no. 4,pp. 1073-1082.

14.Fu, J.R., T.A. Lipo, “Disturbance FreeOperation of a Multiphase Current Regulated Motor Drive with an Opened Phase,” IEEE Transactions on Industry Applications, Sept.-Oct. 1994, vol. 30, no 5,pp. 1267-1274.

15.Chen, S., E. Zhong, T.A. Lipo, “A New Approach toMotor Condition Monitoring in Induction Motor Drives,” IEEE Transactions on Industry Applications, July-Aug. 1994, vol. 30, no 4, pp. 905-911.

16.Arefeen, M.S., M. Ehsani, T.A. Lipo, “An Analysis of theAccuracy of Indirect Shaft Sensor for Synchronized Reluctance Motor,” IEEE Transactions on Industry Applications, Sept.-Oct. 1994, vol. 30, no 5, pp. 1202-1209.

17.Toliyat, H., T.A. Lipo, “Analysis ofConcentrated Winding Induction Machines for Adjustable Speed Drive Aplications - Experimental Results,” IEEETransactions on Energy Conversion, Dec. 1994, vol. 9, no. 4, pp.695-700.

18.Zhong, E., S. Chen, T.A. Lipo, “Improvements in EMI Performance of Inverter-Fed Motor Drives,” IEEE-APECConference Record,Orlando, FL, Feb. 13-17, 1994, pp. 608-614.

19.da Silva, E.R.C., G. Ledwich, M.T. Aydemir, T.A. Lipo. A PWM High Frequency Series Resonant DC Link Converter and its Utilization as a DCMotor Drive,” IEEE-IASAnnual Meeting, Oct.2-7, 1994.

20.Lorenz, R.D., T.A. Lipo, D.W. Novotny, “Motion Control withInduction Motors,” IEEE Proceedings Special Issue on Power Electronics and Motion Control, Aug. 1994,vol. 82, no. 8, pp. 1215-1240.

21.Toliyat, H.A., M.M. Rahimian, T.A. Lipo, “Analysis and Modelingof Five Phase Converters for Adjustable Speed Drive Applications,” European Power Electronics Conference,Brighton, England, Sept. 1993, vol. 5, pp. 194-199.

22.Mohamed, M.O.E., T.A. Lipo, “A New Induction Machine Model for Analysis of Eccentric Rotor MagneticPull,” SPEEDAM Conference,June 7-9, 1994, vol. 1, pp. 173-177.

23.Mezs, P., F. Nozari, A. Julian, C. Sun, T.A. Lipo,“SensorlessSynchronous Motor Drive for Use on Commercial Transport Airplanes,” IEEE-IAS Conference Record, Oct. 2-7, 1994, pp. 553-559.

24.Sarlioglu, B., Y. Zhao, T.A. Lipo, “A Novel DoublySalient Permanent Magnet Generator,” IEEE-IAS Conference Record, Oct. 2-7, 1994,vol. 1, pp. 9-15.

25.Abeyratne, S.G., M.T. Aydemir, T.A. Lipo, Y.Murai, “Current Clamped,PWM, Quasi-Resonant DC Link Series Resonant Converter,” IEEE-IAS Conference Record, Oct. 2-7, 1994, vol. 2, pp. 820-826.

26.Shakal, A.J., Y. Liao, T.A. Lipo, “A Permanent Magnet ACMachine Structure with True Field Weakening Capability,” IEEE International Symposium on Ind. Elect., June 1-3, 1993, pp. 19-24.

27.Yoshida, M., H. Soebagia, Y. Murai, T.A. Lipo, “Series Resonant DCLink Dual Converter as a DC Motor Drive,” European Power Elect. Conference, Sept. 1993, vol. 5, pp. 188-193.

28.Zhao, Y., T.A. Lipo, “Space Vector PWM Control of Dual Three Phase Induction Machine Using VectorSpace Decomposition,” IEEE-IAS Conference Record, Oct.2-7, 1994, pp. 742-749.

29.Hochgraf, C., R. Lasseter, D.M. Divan, T.A. Lipo, “Comparison ofMultilevel Inverters for Static Var Compensation,” IEEE-IAS Conference Record, Oct.2-7, 1994, vol. 2, pp. 921-928.

30.Ometto, A., A. Julian, T.A. Lipo, “A Novel Low CostVariable Reluctance Motor Drive,” International Conference on Electrical Machines, Sept. 5-8, 1994.

31.Arafeen, M.S.;,M. Ehsani, T.A. Lipo, “Indirect StartupRotor Position Sensor for Synchronous Reluctance Motor,” IEEE-APEC, 1994, vol. 1, pp. 78-82.

32.Matsuo, T., T.A. Lipo, “Rotor Position Detection Scheme for Synchronous Reluctance Motor Based onCurrent Measurements,” IEEE-IAS Conference Record, Oct. 2-7, 1994, pp. 627-634.

33.Chen, S., T.A. Lipo, A Passively Clamped Quasi Resonant DC Link Inverter,” IEEE-IAS Conference Record, Oct.2-7, 1994, vol. 2, pp. 841-848.

34.Klabunde, M.C., Y. Zhao, T.A. Lipo, “Current Control of aThree-level Rectifier/Inverter Drive System,” IEEE-IAS Conference Record, Oct.2-7, 1994, vol. 2, pp. 859-866.

35.Lou, X.,A. El-Antably, T.A. Lipo, “Multiple CoupledCircuit Modeling of Synchronous Reluctance Machines,” IEEE-IAS Conference Record,1994, vol. 1, pp. 281-289.

36.Ometto, A., A. Julian, T.A. Lipo, “A Novel Low Cost for Variable Reluctance Motor Drive,” International Conference on Electrical Machines, Paris, France, Sept. 5-8, 1994.

37.Hava, A., T.A. Lipo, W.L. Erdman, “Utility Interface Issues For Line Connected PWM Voltage Source Converters: A Comparative Study,” Applied Power Electronics Conference andExposition, Mar.1995, vol.1, iss. 0, pp.125-132.

38.Murai, Y., H. Ishikawa, T.A. Lipo, “New Series Resonant DC Link Inverter For Electric Vehicle Drives,” IEEEIAS Annual Meeting Conference Record, 1994, vol. 1, pp. 443-447.

39.Arafeen, M.S., M. Ehsani, T.A. Lipo, “Sensorless PositionMeasurement in Synchronous Reluctance Motor,” IEEE Transactions on Power Electronics, Nov. 1994, vol. 9, no. 6, pp.624-630.

1995 Publications

1.Liao, Y., F. Liang., T.A. Lipo, “A Novel PermanentMagnet Motor with Doubly Salient Structure,” IEEE Transactions on Industry Applications,Sept.-Oct. 1995, vol. 31, no. 5, pp. 1069-1078.

2.Zhao, Y., Y. Li, T.A. Lipo, “Force CommutatedThree-Level Boost Type Rectifier,” IEEE Transactions on Industry Applications, Jan.-Feb.1995, vol. 31, no.1, pp. 155-161.

3.Li, H..Y., F. Liang, Y. Zhao, T.A. Lipo, “A Doubly SalientDoubly Excited Variable Reluctance Motor,” IEEE Transactions on Industry Applications,Jan.-Feb. 1995, vol. 31, no. 1, pp. 99-106.

4.Luo, X., T.A. Lipo, Y. Liao, H. Toliyat, A. El-Anatably, “MultipleCoupled Circuit Modeling of Induction Machines,” IEEE Transactions on Industry Applications, Mar.-Apr. 1995, vol. 31, no. 2, pp. 311-318.

5.Mezs, P., F. Nozari, A. Julian, C. Sun, T.A. Lipo,“SensorlessSynchronous Motor Drive for Use on Commercial Transport Airplanes,” IEEE Transactions on Industry Applications, July-Aug. 1995, vol. 31, no. 4, pp. 850-859.

6.Zhao, Y., T.A. Lipo, “Space Vector PWMControl of Dual Three Phase Induction Machine Using Vector Space Decomposition,” IEEE Transactions on Industry Applications, Sept.-Oct. 1995, vol. 31, no. 5,pp. 1100-1109.

7.Arafeen, M.S., M. Ehsani, T.A. Lipo, “Sensorless PositionMeasurement in Synchronous Reluctance Motor,” IEEE Transactions on Power Electronics, Nov. 1994, vol. 9, no 6, pp. 624-630.

8.Matsuo, T., T.A. Lipo, “Rotor PositionDetection Scheme for Synchronous Reluctance Motor Based on Current Measurements,” IEEE Transactionson Industry Applications,July-Aug. 1995, vol. 31, no. 4, pp. 860-868.

9.Toliyat, H.A., T.A. Lipo, “Transient Analysisof Cage Induction Machines Under Stator, Rotor Bar, and End Ring Faults,” IEEE Transactions on Energy Conversion, June1995, vol. 10, no. 2, pp. 241-247

10.Chen, S., T.A. Lipo, “Soft-Switched Inverter for Electric Vehicle Drives,” APEC Conference Record, Mar. 5-9, 1995, vol. 2, pp. 586-591.

11.Sarlioglu, B., T.A. Lipo, “Comparison of Power Production Capability Between Doubly Salient Permanent Magnetand Variable Reluctance Type Generators,” International Aegean Conference on Electrical Machines & Power Electronics Conference Record,June5-7, 1995.

12.Li, Y., F. Leonardi, T.A. Lipo, “A Novel Doubly Salient Permanent Magnet Generator Capable of FieldWeakening,” International Conference on Design to Manufacturing in Modern Industry, May 29-30,1995.

13.Chen, S., T.A. Lipo, D. Fitzgerald, “Measurement andAnalysis of Induction Motor Bearing Currents in PWM Inverter Drives,” IEEE Summer Power Meeting, July1995.

14.Osama, M., T.A. Lipo, “A New Inverter Control Scheme for Induction Motor Drives Requiring Wide SpeedRange,” IEEE - IAS Annual Meeting Conference Record, Oct. 8-12, 1995, vol. 1,pp. 350 – 355.

15.Chen, S., T.A. Lipo, D. Fitzgerald, “Modeling of MotorBearing Currents in PWM Inverter Drives,” IEEE-IAS Conference Record, 1995, pp. 388-393.

16.Sinha, G., C. Hochgraf, R.H. Lasseter, D.M. Divan, T.A. Lipo, “FaultProtection in a Multilevel Inverter Implementation of a Static Condenser,” IEEE-IAS Conference Record, Oct. 8-12, 1995, pp. 2557-2564.

17.Hava, A.M., T.A. Lipo, W.L. Erdman, “Utility InterfaceIssues for Line Connected PWM Voltage Source Converters: A Comparative Study,” APEC Conference Record, Mar. 1995,vol. 1, pp. 125-132.

18. Lipo, T.A., Y. Li, “A Doubly Salient Permanent Magnet Motor Capable of Field Weakening,” IEEE -Power Electronics Specialists Conference, June 1995, vol. 1, pp. 565 – 571.

19.Kutkut, N.H., H.M.Cherradi, T.A. Lipo, “Analysis of Voltage Controlled Induction Motors Using Quasi-Rotating ReferenceFrame,” Mathematics and Computers in Simulation, 1995, vol. 38, no. 2, pp.304-310.

20.Zhong, E., S. Chen, T.A. Lipo, “Improvements in EMIPerformance of Inverter-Fed Motor Drives,” IEEE Transactions on Industry Applications, Nov.-Dec.1995, vol. 31, no. 6, pp. 1247-1256.

21.Chen, S., B. J. C. Filho, T.A. Lipo, “Design andImplementation of a Passively Clamped Quasi Resonant DC Link Inverter,” IEEE IAS Annual Meeting, Oct. 8-12, 1995, vol. 3, pp. 2387-2392.

22.Lipo, T.A.,Y. Li, “The CFM - A New Family of Electrical Machines,” IPEC Conference Record, Japan, Apr. 3-7, 1995, pp. 1-8.

1996 Publications

  1. Chen, S., T.A.Lipo, D. Fitzgerald, “Source ofInduction Motor Bearing Currents Caused by PWM Inverters,” IEEETransactionson Energy Conversion, Mar. 1996, vol. 11, no. 1, pp. 25-32.
  2. Law, J.D., T.J.Busch, T.A. Lipo, “Magnet CircuitModeling of the Field Regulated Reluctance Machine. Part I: Model Development,” IEEE Transactions on EnergyConversion, 1996,vol. 2, no. 1, pp. 49-55.
  3. Law, J.D., T.J.Busch, T.A. Lipo, “Magnet CircuitModeling of the Field Regulated Reluctance Machine. Part II: Saturating Modeling and Results,” IEEE Transactions onEnergyConversion, 1996, vol. 2, no. 1, pp. 56-61.

4.Chen, S., T.A. Lipo, D. Fitzgerald, “Measurement andAnalysis of Induction Motor Bearing Currents in PWM Inverter Drives,” IEEE Transactions onIndustry Applications, Nov.-Dec. 1996, vol. 32 , iss. 6 , pp. 1365 – 1370.

5.Zhao, Y., T.A. Lipo, “Field-OrientedControl of Multi-Phase Induction Machine with Structural Unbalance,” APEC Conference Record, 1996, pp. 380-386.

6.Osama, M., T.A. Lipo, “A New InverterControl Scheme for Induction Motor Drives Requiring Wide Speed Range,” IEEE Transactions onIndustry Applications, July-Aug. 1996, vol. 32, no. 4, pp. 938-944.

7.Zhao, Y., T.A. Lipo, “Modeling andControl of Multi-Phase Induction Machine with Structural Unbalance,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 578-584.

8.Leonardi, F., T. Matsuo, T.A. Lipo, “Iron Loss Calculationfor Synchronous Reluctance Machines,” IEEE-PEDES, Jan. 8-11,1996, pp. 307-312.

9.Zhao, Y., T.A. Lipo, “An Approach to Modeling and Field-Oriented Control of a Three-PhaseInduction Machine with Structural Unbalance,” IEEE-APEC Conference Record,Apr. 1996, pp. 380-386.

10.Julian, A., D. Divan, T. Lipo, F. Nozari, P. Mezs,“Double BridgeResonant DC Link Converter with Variable Input and Output Frequency,” IEEE-APEC Conference Record, Apr. 1996, pp. 181-186.

11.Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE-IAS Conference Record, San Diego, CA, Oct. 6-11, 1996, pp. 980-987.

12.De Broe, A.M., A.L. Julian, T.A. Lipo, “Neutral-to-GroundVoltage Minimization in a PWM-Rectifier/Inverter Configuration,” IEE Conference on PowerElectronics and Variable Speed Drives, Sept.23-25, 1996, pp. 564-568.

13.Bernet, S., T. Matsuo, T.A. Lipo, “A Matrix ConverterUsing Reverse Blocking NPT-IGBT’s and Optimized Pulse Patterns,” IEEE-PESC Conference Record, June 1996,pp. 107-113.

14.Leonardi, F., Y. Li, T. Matsuo, T.A. Lipo, P. McCleer, “DesignConsiderations and Test Results for a Doubly Salient PM Motor with Flux Control,” IEEE-IAS ConferenceRecord, Oct. 6-11, 1996, pp. 458-463.

15.Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach toSizing and Power Density Equations for Comparison of Electrical Machines,” IEEE-IAS Conference Record,Oct.1996, pp. 836-842.

16.Lipo, T., G. Oriti, A. Julian, “Elimination of Common Mode Voltage in Three-Phase Sinusoidal Power Converters,”IEEE-PESC, June 24-27, 1996, pp. 1968-1972.

17.S. Bhattacharya, L. Resta, D.M. Divan, D.W.Novotny, T.A. Lipo, “ExperimentalComparison of Motor Bearing Currents with PWM Hardand Soft Switched Voltage Source Inverters,” IEEE-PESC, Italy, June 1996, pp.1528-1534.

18.Luo, X., D.Qin, T.A. Lipo, “A Novel Two Phase Doubly Salient Permanent Magnet Motor,” IEEE-IASConference Record, Oct. 1996, pp. 808-815.

19.Osama, M., T.A. Lipo, “Modeling and Analysis of a Wide Speed Range Induction Motor Drive Based onElectronic Pole Changing,” IEEE-IAS Conference Record, Oct. 1996, pp. 357-364.

20.Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Application of theMatrix Converter to Induction Motor Drives,” IEEE-IAS Conference Record, Oct. 1996, pp. 60-67.

21.Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Modeling andSimulation of Matrix Converter/Induction Motor Drive,” IMACSConference, Sept.1996.

22.Zhong, E., T.A. Lipo, J.R. Jaeschke, D. Gritter, “Analytical Estimationand Reduction of Conducted EMI Emissions in High Power PWM Inverter Drives,” IEEE PESC Conference Record,Italy, June 1996, pp. 1169-1175.

23.Chen, S., T.A. Lipo, D.W. Novotny, “Circulating Type MotorBearing Current in Inverter Drives,” IEEE-IAS Conference Record, Oct. 1996, pp. 162-167.

24.Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach toSizing and Power Density Equations for Comparison of Electrical Machines,” IEEE-IAS Conference Record, San Diego, CA, Oct. 1996, pp. 836-842.

25.Abeyratne, S.G., J. Horikawa, Y. Murai, T.A. Lipo,“Current-Clamped,Modified Series Resonant DC-Link Power Converter and Control Strategies,” IEE Transactions, Japan, 1996, vol. 116-D, no. 11, pp. 1145-1152.

26.Bernet, S., K. Bernet, T.A. Lipo, “The Auxiliary ResonantCommutated Pole Matrix Converter-A New Topology for High Power Applications,” IEEE-IAS ConferenceRecord, Oct. 1996, pp. 1242-1249.

27.Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE-IAS Conference Record, Oct.1996,pp. 980-987.

28.Leonardi, F., T. Matsuo, Y. Li, T.A. Lipo, P. McCleer, “DesignConsiderations and Test Results for a Doubly Salient PM Motor with Flux Control,” IEEE-IAS Conference Record, San Diego, CA, Oct. 1996,pp. 458-463.

29.Lipo, T.A, “Advanced Motor Technologies: Converter Fed Machines (CFMs),” International Conference on Energy Efficiency Improvements in Electric Motors, Oct.1996.

30.Cardoso-Filho, B.J., T.A. Lipo, “Space Vector Analysis and Modulation Issues of Passively ClampedQuasi-Resonant Inverters,” IEEE-IAS Conference Record, 1996, pp. 1179-1185.

31.Soebagia, H., M. Yochida, Y. Murai, T.A. Lipo, “Input Power FactorControl of AC-DC Series Resonant DC Link Converter Using PID Operation,” IEEE Transactions on Power Electronics, Jan.1996, vol. 11, no. 1, pp. 43-48.

32.Murai, Y.; S.G. Abeyratne; T.A. Lipo; P. Caldeira,“Current PeakLimiting for a Series Resonant DC Link Power Conversion Using a Saturable Core,” Electric Machines and Power Systems, 1996, vol. 24, no. 1, pp. 51-64.

33.Chen, S., T.A. Lipo, “A Novel Soft-Switched Inverter for AC Motor Drives,” IEEE Transactions on Power Electronics, July 1996, vol. 11, no. 4, pp. 653-659.

34.Shakal, A., Y. Liao, T.A. Lipo, “A New Permanent Magnet Motor Structure with True Field Weakening,”Electric Machines and Power Systems, 1996, vol. 24, no. 5, pp. 497-510.

35.Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance,Part 1:Machine Modeling and Multi-Dimensional Current Regulator,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 570-577.

36.Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance,Part 2:Field Oriented Control and Experimental Verification,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 578-584..

37.Fu, J.R.; T.A. Lipo, “A Strategy to Isolate the Switching Device Fault of a Current Regulated Motor Drive,” Electrical Machines and Power Systems, Dec. 1996,vol. 24, no. 8, pp. 911-920.

38.Caricchi, F., F. Crescimbini, T.A. Lipo, “Study of a PermanentMagnet Excited Axial Flux Electromagnetic Differential Motor for Wheel Direct Drive Application,” SPEEDAM,1996, vol. C4, pp. 21-28.

39.Matsuo, T., A. El-Antably, T.A. Lipo, “A New Control Strategyfor Optimum Efficiency Operation of a Synchronous Reluctance Motor,” IEEE-IAS Conference Record, Oct. 1996, pp. 109-116.

40.Kim, G.T.,T.A. Lipo, “VSI-PWMRectifier/Inverter System with Reduced Switch Count,” IEEE Transactions on Industry Applications,Nov.-Dec. 1996, vol. 32, no. 6, pp. 1331-1337.

1997 Publications

1.Wallace, R., T.A. Lipo, J. Tapia, L. Moran, “Design andConstruction of Permanent Magnet Axial Flux Synchronous Generator,” IEEE Electric Machines and Drives Conference Record, May 18-21, 1997, pp. MA1/4.1-4.3.

2.Osama, M., T.A. Lipo, “Modeling and Analysisof a Wide Speed Range Induction Motor Drive Based on Electronic Pole Changing,” IEEE Transactions on Industry Applications, Sept.-Oct.1997, vol. 33, no. 5,pp. 1177-1184.

3.Qin, D., X. Luo, T.A. Lipo, “Reluctance MotorControl for Fault-Tolerant Capability,” IEEE-IEMDC, Milwaukee, WI, May 18-21, 1997, pp. WA1-1.1-WA1-1.6.

4.Abeyratne, S.G., J. Horikawa, Y. Murai, T.A. Lipo,“Current-Clamped,Modified Series Resonant DC-Link Power Converter for a General Purpose Induction Motor Drive,”IEEE Transactionson Power Electronics, Mar.1997, vol. 12, no. 2, pp. 201-212.

5.Matsuo, T., A. El-Antably, T.A. Lipo, “A New ControlStrategy for Optimum Efficiency Operation of a Synchronous Reluctance Motor,” IEEE Transactions onIndustry Applications, Sept.-Oct. 1997, vol. 33, no. 5, pp. 1146-1153.

6.Munoz-Garcia, A., T.A. Lipo, D.W. Novotny, “A New Induction MotorOpen-Loop Speed Control Capable of Low Frequency Operation,” IEEE-IAS Conference Record, Oct. 5-9, 1997,vol. 1,pp.579-586.

7.Hava, A.M., R.J. Kerkman, T.A. Lipo, “A High PerformanceGeneralized Discontinuous PWM Algorithm,” IEEE-APEC Conference Record, Feb. 23-27, 1997, pp. 886-894.

8.Sinha, G., T.A. Lipo, “A PEBB Based Inverter-System Integration,” Accepted for GovernmentMicrocircuit Applications Conference (GOMAC), Mar. 1997.

9.Stankovic, A., E.R. Benedict, V. John, T.A. Lipo, “A Novel Method forMeasuring Induction Machine Magnetizing Inductance,” IEEE-IAS Conference Record, Oct. 5-9, 1997, vol.1, pp.234-238.

10.Wallace, R.R., T.A. Lipo, L.A. Moran, J.A. Tapia, “Design andConstruction of a Permanent Magnet Axial Flux Synchronous Generator,” IEEE-IEMDC,May 18-21, 1997, MA1-4.1-MA1-4.3.

11.da Silva, E.R., Y. Murai, T.A. Lipo, L.P.B. deOliveira, C.B. Jacobina, “PulsedDc-Link Current Converters - A Review,” IEEE-IAS Conference Record, Oct. 5-9,1997, vol.2, pp.1406-1413.

12.Matsuo, T., J. Luo, E. Hoffman, T.A. Lipo, “Self Excited VariableReluctance Generator,” IEEE-IAS Conference Record, Oct. 5-9,1997, vol.1, pp.653-660.

13.Chen, S., T.A. Lipo, “Bearing Currents and Shaft Voltages of an Induction Motor Under Hard and SoftSwitching Inverter Excitation,” IEEE-IAS Conference Record, Oct. 5-9,1997,vol.1, pp.167-173.

14.Sinha, G., T.A. Lipo, “A Four Level Inverter Based Drive With A Passive Front End,” IEEE-PESCSummer Meeting, 1997, pp. 590-596.

15.Oriti, G., A.L. Julian, T.A. Lipo, “A New Space VectorModulation Strategy for Common Mode Voltage Reduction,” IEEE-PESC, June 22-27, 1997, pp. 1541-1546.

16.Cardoso-Filho, B.J., S. Bernet, T.A. Lipo, “A New Control Strategyfor the PWM Current Stiff Rectifier/Inverter with Resonant Snubbers,” Submitted to IEEE-PESC, 1997, pp. 573-579.

17.Filho, B.J.C., S. Bernet, T.A. Lipo, “Current StiffConverter Topologies with Resonant Snubbers,” IEEE IAS Conference Record, Oct. 5-9, 1997, vol.2, pp. 1322-1329.

18.Hava, A.M., S.K. Sul, R.J. Kerkman, T.A. Lipo, “DynamicOvermodulation Characteristics of Triangle Intersection PWM Methods,” IEEE-IAS Conference Record, Oct. 1997,vol.2, pp.1523-1528.

19.Oriti, G., A.L. Julian, T.A. Lipo, “An Inverter/MotorDrive with Common Mode Voltage Elimination,” IEEE IAS Conference Record, Oct.5-9,1997, vol. 1, pp.587-592.

20.Hava, A.M., R.J. Kerkman, T.A. Lipo, “Simple Analytical andGraphical Tools for Carrier Based PWM Methods,” IEEE-PESC Conference Record, 1997, vol. 2, pp. 1462-1471.

21.Tidu, S., B. Pietra, J. Luo, T.A. Lipo, “Innovative ElectricalMachines for Traction Applications,” World Congress on Railway Research, Florence, Italy, Nov. 1997, pp.459-466.

22.Leonardi, F, P.J. McCleer, T.A. Lipo, “The DSPM: An ACPermanent Magnet Traction Motor with True Field Weakening,” International Conference on “All Electric Combat Vehicle,” Detroit, MI, 1997.

23.Huang, S., J. Luo, T.A. Lipo, “Analysis and Evaluation of the Transverse Flux Circumferential Current Machine,” IEEE-IASConference Record, Oct. 5-9,1997, vol. 1, pp. 378-384.

24.Sinha, G., T.A. Lipo, “A New Modulation Strategy for Improved DC Bus Utilization in Soft and HardSwitched Multilevel Inverters,” IECON, Nov. 1997, pp. 670-675.

25.J. Luo, S. Huang, T.A. Lipo, “Evaluation ofTransverse Flux Circumferential Current Machine by The Use of Sizing Equations,” International Conference on Electrical Machines and Drives, Milwaukee WI, June 1997, pp. WB2-15.1-WB2-15.3.

26.Kim, G-T., T.A. Lipo, “DC Link Voltage Control of Reduced Switch VSI-PWM Rectifier/Inverter System,”IEEE Industrial Electronics Society IECON, Nov. 9-14, 1997, vol. 2, pp.833-838.

27.Sinha, G., T.A. Lipo, “Rectifier Current Regulation in Four Level Drives,” IEEE IAS Annual Meeting Conference Record, Oct. 1997.

28.Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach toSizing and Power Density Equations for Comparison of Electrical Machines,” IEEE Transactions on Industry Applications, Jan.-Feb. 1998, vol. 34, no. 1, pp. 92-97.

1998 Publications

1.Toliyat, H.,M. Rahimian, T.A. Lipo, “Analysis and Simulation of Five-Phase Synchronous Reluctance Machines Including Third Harmonic of Airgap MMF,” IEEE Transactions on Industry Applications, Mar.-Apr. 1998, vol. 34, no. 2, pp. 332-339.

2.Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach toSizing and Power Density Equations for Comparison of Electrical Machines,” IEEE Transactionson Industry Applications, Jan.-Feb. 1998, vol. 34, no. 1, pp. 92-97.

3.Chen, S., T.A. Lipo, “Circulating Type Motor Bearing Current in Inverter Drives,” IEEE - Industry Applications Magazine, Jan.-Feb. 1998, vol. 4 , iss. 1, pp. 32-38.

4.Sinha, G., T.A. Lipo, “A Four LevelRectifier-Inverter System for Drive Applications,” IEEE Industry Applications Magazine, Jan.-Feb. 1998,vol. 4 , iss. 1, pp. 66 – 74.

5.Cardoso-Filho, B.J., T.A. Lipo, “Space Vector Analysisand Modulation Issues of Passively Clamped Quasi-Resonant Inverters,” IEEE Transactions on Industry Applications,July-Aug. 1998, vol. 34, no. 4, pp. 861-869.

6.Hava, A.M., R.J. Kerkman, T.A. Lipo, “A High PerformanceGeneralized Discontinuous PWM Algorithm,” IEEE Transactions on Industry Applications, Sept.-Oct. 1998, vol. 34, no. 5, pp. 1059-1071.

7.Chen, S., T.A. Lipo, “Bearing Currents and Shaft Voltages of an Induction Motor Under Hard and SoftSwitching Inverter Excitation,” IEEE Transactions on Industry Applications, Sept.-Oct. 1998, vol. 34, no. 5, pp. 1042-1048.

8.Sng, E.K.K., A.C. Liew, T.A. Lipo, “New Observer Based DFOScheme for Speed Sensorless Field-Oriented Drives for Low to Zero Speed Operation,” IEEETransactions on Power Electronics, Sept. 1998, vol. 13, no. 5, pp. 959-968.

9.Munoz-Garcia, A., T.A. Lipo, “On-Line Dead Time Compensation Technique for Open-Loop PWM-VSI Drives,”IEEE-APEC Conf. Rec.February 1998.Vol.1.pp. 95-100.

10.Julian, A.L., R. Cuzner, G. Oriti, T.A. Lipo, “Active Filtering forCommon Mode Conducted EMI Reduction in Voltage Source Inverters,” IEEE-APEC Conference Record, Feb. 1998,vol. 2, pp. 934-939.

11.Manjrekar, M.D., T.A. Lipo, “A Hybrid Multilevel Inverter Topology for Drive Applications,”IEEE-APEC Conference Record,Feb. 1998, vol. 2, pp. 523-529.

12.Kim, S., S.-K. Sul, T.A. Lipo, “AC to AC Power Conversion Based on Matrix Converter Topology withUnidirectional Switches,” IEEE Applied Power Electronics Conference, Feb. 1998, pp. 301-307.

13.Brumsickle, W.E., D.M. Divan, T.A. Lipo, “Reduced SwitchingStress in High-Voltage IGBT Inverters via a Three-Level Structure,” IEEE-APEC Conference Record, Feb. 1998, vol.2, pp. 544-550.

14.John, V., B.-S. Suh, T.A. Lipo, “Fast Clamped Short Circuit Protection of IGBTs,” IEEE-APEC ConferenceRecord, Feb.1998, vol. 2, pp. 724-730.

15.Cardoso Filho, B.J., T.A. Lipo, “A Reduced Parts Count Realization of the Resonant Snubbers for High PowerCurrent Stiff Converters,” IEEE-APEC Conference Record, Feb. 1998, vol. 2,pp. 558-564.

16.Rockhill, A., T.A. Lipo, A.L. Julian, “High Voltage BuckConverter Topology for Common Mode Voltage Reduction,” IEEE-APEC Conference Record, Feb. 1998, vol. 2, pp.940-943.

17.Rao, A., A.L. Julian, T.A. Lipo, “Investigation of a Modified Single Phase Inverter Topology for Reduction of CommonMode Voltage,” IEEE-PESC, June 1999, vol. 2, pp. 850-854.

18.Munoz-Garcia, A., T.A. Lipo, D.W. Novotny, “A New Induction MotorV/F Control Method Capable of High Performance Regulation at Low Speeds,” IEEE Transactions on Industry Applications, July-Aug. 1998, vol. 34, no. 4, pp. 813-821.

19.Munoz-Garcia, A., T.A. Lipo, “Dual Stator Winding Induction Machine Drive,” IEEE-IAS Conference Record,St. Louis, MO, Oct. 1998, vol. 1, pp.601-608.

20.Munoz-Garcia, A., T.A. Lipo, “Complex Vector Model of the Squirrel Cage Induction Machine IncludingInstantaneous Rotor Bar Currents,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1,pp. 57-64.

21.Sarlioglu, B., T.A. Lipo, “Nonlinear Modeling and Simulation of Single Phase Doubly Salient Permanent MagnetGenerator,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp.18-26.

22.Luo, J., D. Qin, T.A. Lipo, S. Huang, S.Li, “Axial FluxCircumferential Current Permanent Magnet (AFCC) Machine,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1,pp. 144-151.

23.John, V., B.-S. Suh, T.A. Lipo, “High Performance Active Gate Drive for High Power IGBTs,” IEEE-IASConference Record, St. Louis, MO, Oct.1998, vol. 2, pp. 1519-1529.

24.Zhong, E., T.A. Lipo, S.Rossiter, “TransientModeling and Analysis of Motor Terminal Voltage on PWM Inverter-Fed AC Motor Drives,”IEEE-IAS Conference Record, St. Louis, MO, Oct.1998, vol. 1, pp. 773-780.

25.Chen, S., T.A. Lipo, “Induction Motor Bearing Currents and Shaft Voltages Caused by PWM Inverters,”CAST Conference of Young Scientists, Beijing, China, Aug. 1998.

26.Manjrekar, M.D., T.A. Lipo, “A Generalized Structure of Multilevel Power Converter,” PEDES, Perth, Australia, Nov.-Dec. 1998, vol. 1, pp. 62-67.

27.Suh, B.-S., G. Sinha, M.D. Manjrekar, T.A. Lipo, “Multilevel PowerConversion - An Overview of Topologies and Modulation Strategies,” Optimization of Electrical & ElectronicEquipment, 1998, vol. 2, pp. AD11-AD24.

28.Manjrekar, M.D., T.A. Lipo, S.-G. Chang, K.-S.Kim, “Flux TrackingMethods for Direct Field Orientation,” ICEM Conference Record, 1998, vol. 2, pp. 1022-1029.

29.Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Mathematics andComputers in Simulation,” Mathematics and Computers in Simulation 46., 1998, pp. 175-195.

30.Ledezma, E., A. Munoz-Garcia, T.A. Lipo, “A New Dual Three-PhaseDrive System with a Reduced Switch Count,” IEEE-IAS Conference Record, St. Louis, MO, Oct.1998, vol. 1, pp. 781-788.

31.Al-Saffar, M.A., E.-C. Nho, T.A. Lipo, “Controlled ShuntCapacitor Self-Excited Induction Generator,” IEEE IAS Annual Meeting Conference Record, St. Louis, Oct.1998, pp. 1486-1490.

32.Wallace, R.R.,V.D.Fierro, L.A. Moran,T.A. Lipo,Use of a Conductor Screen to Magnetize NdFeB Magnets,” IEEE 7th JointMMM-Intermag Conference, San Francisco, CA, Jan. 6-9, 1998.

33.De Broe,A. M., A.L. Julian, T.A. Lipo, “Neutral-to-Ground Voltage Minimization in a PWM-Rectifier/Inverter Configuration,”Electric Machines and Power Systems, 1998, vol. 26, no. 7, pp. 741-748.

34.Hava, A.,R.J. Kerkman, T.A. Lipo, “Carrier-Based PWM-VSI Overmodulation Strategies: Analysis, Comparison and Design,” IEEE Transactions on Power Electronics, July 1998, vol. 13, no. 4, pp.674-689.

1999 Publications

1.Lipo, T., G. Oriti, A. Julian, “Elimination of Common Mode Voltage in Three-Phase Sinusoidal Power Converters,”IEEE Transactions on Power Electronics, Sept. 1999, vol. 14, no. 5, pp.982-989.

2.Hava, A.M., S.K. Sul, R.J. Kerkman, T.A. Lipo, “Dynamic Overmodulation Characteristics of TriangleIntersection PWM Methods,” IEEE Transactions on Industry Applications, July-Aug.1999, vol. 35,no. 4, pp. 896-907.

3.Hava, A.M., R.J. Kerkman, T.A. Lipo,“SimpleAnalytical and Graphical Tools for Carrier Based PWM Methods,” IEEE Transactions on Power Electronics,Jan.1999, vol. 14, no. 6, pp. 49-61.

4.Munoz-Garcia, A., T.A. Lipo, “On-Line Dead TimeCompensation Technique for Open-Loop PWM-VSI Drives,” IEEE Transactions on Power Electronics,July 1999, vol. 14, no. 4, pp. 683-689.

5.John, V., B.-S. Suh,T.A. Lipo, “Fast Clamped ShortCircuit Protection of IGBTs,” IEEE-IASTransactions on Industry Applications, Mar.-Apr. 1999, vol. 35, no. 2, pp. 477-486.

6.Munoz-Garcia, A., T.A. Lipo, “Complex VectorModel of the Squirrel Cage Induction Machine Including Instantaneous Rotor Bar Currents,” IEEETransactions on Industry Applications, Nov.-Dec. 1999, vol. 35,no.6, pp. 1332-1340.

7.John, V., B.-S. Suh,T.A. Lipo, “High PerformanceActive Gate Drive for High Power IGBTs,”IEEE-IAS Transactions on Industry Applications, Sept.-Oct. 1999, vol. 35, no. 5,pp.1108-1117.

8.Toba, A., T.A. Lipo, “Generic Torque-Maximizing Design Methodology of Permanent Magnet Vernier Machine,” IEEE-IEMDC Conference Record, Seattle, WA, May 1999, pp. 522-524.

9.Sarlioglu, B.,T.A. Lipo, “Assessment of Power Generation Capability of Doubly-Salient PM Generator,”IEEE-IEMDC Conference Record, Seattle, WA.May1999, pp. 549-552.

10.Luo, X.,T.A. Lipo, “A Synchronous/Permanent Magnet Hybrid AC Machine,” IEEE-IEMDCConference Record, Seattle, WA.May1999, pp. 19-21.

11.Lipo, T.A., “Electric DrivesTechnology - Part Way to Where?, IEEE-IEMDC Conference Record, Seattle, WA.May1999,pp. 1-3.

12.Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Performance Improvement of Half Controlled Three Phase PWM Boost Rectifier,”IEEE-PESC Conference Record , Charleston, SC,June-July1999, vol. 1, pp. 319-324.

13.Lund, R.,M.D. Manjrekar, P. Steimer, T.A. Lipo, “Control Strategies for a Hybrid Seven-Level Inverter,” EPE Conference Record, Lausanne, Switzerland,Sept. 1999, CD-ROM.

14.Lyra, R.O.C., B.J. Cardoso-Filho, V. John, T.A. Lipo, “Co-Axial CurrentTransformer for Test and Characterization of High Power Semiconductor Devices Under Hard and Soft-Switching,”IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 2009-2016.

15.John, V., B.-S. Suh, T.A. Lipo, “An Active Gate Drivewith Three-Stage Control and Fast Protection for High Power IGBTs,” EPE Conference Record, Lausanne, Switzerland,Sept. 1999, CD-ROM.

16.Toba, A., T.A. Lipo, “Novel Dual-Excitation Permanent Magnet Vernier Machine,”IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 4, pp. 2539-2544.

17.Manjrekar,M.D., T.A. Lipo, “An Auxillary Zero State Synthesizer to Reduce CommonMode Voltage in Three-Phase Inverters,” IEEE-IAS Conference Record, Phoenix, AZ,Oct. 1999, vol. 1, pp. 54-59.

18.Manjrekar, M.D., P. Steimer, T.A. Lipo,“Hybrid MultilevelPower Conversion System: A Competitive Solution for High Power Applications,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 1520-1527.

19.Qin, D.,R. Qu, T.A. Lipo, “A Novel ElectricMachine Employing Torque Magnification and Flux Concentration Effects,” IEEE-IAS Conference Record, Phoenix, AZ,Oct. 1999, vol. 1, pp. 132-139.

20.Osama, M., T.A. Lipo, “Experimental and Finite Element Analysis of an Electronic Pole-Change Drive,”IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 2, pp. 914-921.

21.Consoli, A., F. Gennaro, V. John, T.A. Lipo,“Effects of theInternal Layout on the Performance of IGBT Power Modules,” COBEP, Foz do Iguassu, Brazil, Sept.1999.

22.Garrigan, N.R., W.L. Soong, C.M. Stephans, A. Storace, T.A. Lipo,“Radial ForceCharacteristics of a Switched Reluctance Machine,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol.4, pp. 2250-2258.

23.Cardoso-Filho,B.J., T.A. Lipo, “Application of MTO-thyristors in Current StiffConverters with Resonant Snubbers,” IEEE-IAS ConferenceRecord, Phoenix, AZ,Oct. 1999, vol. 3, pp. 1871-1878.

24.Cardoso-Filho, B.J., T.A. Lipo, “High Power Converters with Active Snubbers for Variable SpeedDrive Applications,” COBEP, Foz do Iguassu, Brazil, Sept.1999.

25.Nho,E.-C., I.-D. Kim, T.A. Lipo, “A New Boost TypeRectifier for a DC Power Supply with Frequent Output Short Circuit,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 2, pp. 1165-1172.

26.Rao, A., T.A. Lipo, A. Julian, “A Modified Single Phase Inverter Topology with Active Common Mode Voltage Rejection,”IEEE-PESC Conference Record, Charleston, SC, June 1999, vol. 2, pp. 850-854.

27.Osama, M., T.A. Lipo, “A Magnetic Relief Scheme for Four Pole Induction Motors,Proceedings of Conference on Electrical Machines, Converters and Systems. Lisbon, Portugal, Sept. 14-16, 1999, vol.1, pp. I-15 - I-21.

28.Jiang, Q., T.A. Lipo, “Switching Angles and DC Link Voltages Optimization for Multilevel Cascade Inverters,”Electric Machines and Power Systems, July 2000, vol. 28, no. 7, pp. 605-612.

29.Suh,B-S., Y-H. Lee, D.-S. Hyun, T.A. Lipo, “A New MultilevelInverter Topology with a Hybrid Approach,” European Power ElectronicsConference, Lausanne Switzerland.,Sept. 1999.

30.Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Complementary Half Controlled Three Phase PWM Boost Rectifier for Multi-DC-LinkApplications,” IEEE Applied Power Electronics Conference, New Orleans, Feb. 2000.

31.Huang, S., J. Luo, F. Leonardi, T.A.Lipo, “A Comparison of PowerDensity for Axial Flux Machines Based on General Purpose Sizing Equations,” IEEE Transactions on Energy Conversion, June 1999, vol. 14, no. 2, pp.185-192.

32.Manjrekar, M.D., T.A. Lipo,S-G Chang, K-S Kim, “FluxTracking Methods for Direct Field Orientation,” Electrical Machines and Power Systems, 1999, vol. 27,pp. 905-920.

2001 Publications

  1. Cardoso-Filho,B.J., T.A. Lipo, “Application ofMTO-thyristorsin Current Stiff Converters with Resonant Snubbers,” IEEETransactionson Industry Applications, Mar.-Apr. 2001, vol. 37, iss. 2, pp.566-573.
  2. Welchko,B.A., T.A. Lipo, “A Novel VariableFrequency Three Phase Induction Motor Drive System Using Only ThreeControlled Switches,” IEEE Transactions on IndustryApplications,Nov.-Dec. 2001, vol. 37, iss. 6, pp. 1739-1745.
  3. Ledezma,E., B. McGrath, A.R. Munoz-Garcia, T.A. Lipo, “Dual AC-Drive Systemwith a Reduced SwitchCount,” IEEE Transactions on Industry Applications, Sept.-Oct.2001,vol. 37, iss. 5, pp. 1325-1333.
  4. Stankovic,A.V., T.A. Lipo, “A Novel ControlMethodfor Input Output Harmonic Elimination of the PWM Boost TypeRectifierUnder Unbalanced Operating Conditions,” IEEE Transactions onPowerElectronics, Sept. 2001, vol. 16, no. 5, pp. 603-611.
  5. McGrath,B.P., D.G. Holmes, T.A. Lipo, “Optimised SpaceVector Switching Sequences for Mutilevel Inverters,” IEEEAppliedPower Electronics Conference (APEC) 2001, Anaheim, CA,Mar. 4-8, 2001, vol. 2, pp 1123-9
  6. Suh,Y., P.G. Albano, V. Tijeras, T.A. Lipo, “Unity PowerFactor Control of a Three-pole PWM AC/DC Converter UnderSingle-phaseInput,” Submitted to CPES Annual Meeting, Blacksburg, VA,Apr. 22-25, 2001.
  7. Huang,S., M. Aydin, T.A. Lipo, “ElectromagneticVibrationand Noise Assessment for Surface Mounted PM Machines,” PowerEngineering Society Summer Meeting conference proceedings, 2001,vol. 3,pp. 1417-1426.
  8. Aydin,M., S. Huang, T.A. Lipo, “Optimum Design and3DFinite Element Analysis of Non-slotted and Slotted Internal RotorTypeAxial Flux PM Disc Machines,” Power Engineering Society SummerMeetingconference proceedings, 2001, vol. 3, pp. 1409-1416.
  9. Huang,S., M. Aydin, T.A. Lipo, “Low Noise andSmoothTorque Permanent Magnet Propulsion Motors: Comparison ofNon-slotted andSlotted Radial and Axial Flux Topologies,” Submitted toInternationalAegean Conference of Electrical Machines and Power Electronics,2001,pp.1-8.
  10. Aydin,M., S. Huang, T.A. Lipo, “Design and 3DElectromagnetic Field Analysis of Non-slotted and Slotted TORUSType AxialFlux Surface Mounted Permanent Magnet Disc Machines,”InternationalElectrical Machine and Drive Conference Proceedings, 2001, pp645-651.
  11. Stankovic,A.V., T.A. Lipo, “A GeneralizedControl Method forInput-Output Harmonic Elimination for the PWM Boost Rectifier UnderSimultaneous Unbalanced Input Voltages and Input Impedances,”PESC2001 conference proceedings, 2001, vol. 3, pp. 1309-1314.
  12. Chomat,M., T.A. Lipo, “Adjustable-SpeedDrive withSingle-Phase Induction Machine for HVAC Applications,” PESC2001conference proceedings, 2001, vol. 3, pp. 1446-1451.
  13. Panda,D., E.L. Benedict, G. Venkataramanan, T.A. Lipo, “ANovel Control Strategy For the Rotor Side Control of a Doubly FedInductionMachine,” IEEE IAS Chicago, Oct. 2001, vol. 3, pp. 1695-1702.
  14. Moreira,A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “Modelingand Evaluation of dv/dt Filters for AC Drives with High SwitchingSpeed,”9th European Conference on Power Electronics and Applications,Graz,Austria, Aug 27-29, 2001, CD-ROM.
  15. Moreira,A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “HighFrequency Modeling for Cable and Induction Motor Over-VoltageStudies inLong Cable Drives,” IEEE Industrial Application Society 36thAnnualMeeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 1787-1794.
  16. Welchko,B.A., T.A. Lipo, “Model ReferenceCurrent Control ofa Unipolar Induction Motor Drive,” IEEE Industrial ApplicationSociety36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp.1807-1813.
  17. Luo,J., S. Huang, S. Chen, T.A. Lipo, “Design andExperiments of a Novel Axial FluxCircumferential Current Permanent Magnet (AFCC) Machine with RadialAirgap,”IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL,Sept. 30-Oct 5, 2001, vol. 3, pp. 1989-1996.
  18. Kikuchi,J., T.A. Lipo, “Three Phase PWMBoost-BuckRectifiers with Power Regenerating Capability,” IEEE IASChicago, IL,Sep 30 - Oct 4, 2001. pp. 308-315.IEEEIndustrial Application Society 36th Annual Meeting, Chicago, IL,Sept.30-Oct 5, 2001, pp. 308-315.
  19. Aydin,M., S. Huang, T.A. Lipo, “Torque Quality andComparison of Internal and External Rotor Axial Flux Surface-MagnetDiscMachines,” Industrial Electronics Society, 2001. IECON '01.The 27th Annual Conference ofthe IEEE,Volume 2, 29 Nov.-2 Dec. 2001 Page(s):1428 - 1434 vol.2.Industrial Electronics, IEEETransactions on Volume 53,Issue3,June 2006 Page(s):822 - 830
  20. Chomat,M., T.A. Lipo,Adjustable-SpeedSingle-Phase IM Drive with ReducedNumber of Switches,” IEEE Industrial Application Society 36thAnnualMeeting, Chicago,IL, Sept. 30-Oct 5, 2001,vol. 1, pp.1800-1806.
  21. Park,S-J., J.-W. Ahn, M.-H. Lee, T.A. Lipo, “Novel Encoderfor SRM Drive with High Resolution Switching Angle Control,”2001 IEEEInternational Symposium on Industrial Electronics (ISIE 2001), Pusan South Korea,vol. 3, pp. 1781-1785.
  22. Tapia,J.A.,F. Leonardi, T.A. Lipo, “CPPM: A SynchronousPermanent Magnet Machine with FieldWeakening,” International Agean Conf. On Electrical Machinesand PowerElectronics, Kusadasi, Turkey,June 2001.
  23. Tapia,J.A., F. Leonardi, T.A. Lipo, “Consequent PolePermanent Magnet Machine with Field Weakening Capability,”International Electrical Machines and Drives Conf. (IEMDC),Cambridge, MA,June 17-20, 2001, pp. 126-131.
  24. McGrath,B.P., M. Manjrekar, G. Holmes, T.A. Lipo, “An ImprovedModulation Strategy for a Hybrid Multilevel Inverter,” IEEEAppliedPower Electronics Conference, Mar. 2001.
  25. Yao,J., J. Krase,T.A. Lipo, “DesignConsiderations for Single PhaseInduction Motor Packaged Drives,” CPES Annual Meeting, Apr.2001,CDROM.
  26. Yao,J., T.A. Lipo, “A Novel Soft-SwitchingInverter withZVS-ZCS Features,” IEEE Power Electronics SpecialistsConference,Vancouver, June 17-21, 2001, CDROM, vol. 2, pp. 1141-1146.
  27. Sarlioglu,B., T.A. Lipo, “Nonlinear Analysis andExperimentalResults of Doubly Salient PM Generator,”IEEEAegean Conference on ElectricalMachines and Power (ACEMP), Kusadasi, Turkey,2001.
  28. Huang,S., M. Aydin, T.A. Lipo, “TORUS ConceptMachines:Pre-Prototyping Assessment for Two Major Topologies,” IEEE IASAnnualMeeting Conference Record , Chicago, IL,Oct.2001, pp. 1619-1625.
  29. Wei,L., T.A. Lipo, “A Novel MatrixConverter Topology withSimple Commutation”, IEEE IAS Annual Meeting Conference Record,Chicago, IL,Oct. 2001,vol. 3, pp. 1749-1754.
  30. Lyra,R., T.A. Lipo, “Torque DensityImprovementin a Six-Phase Induction Motor with Third Harmonic CurrentInjection,”IEEE IAS Annual Meeting Conference Record, Chicago, IL,Oct. 2001, vol. 3, pp.1779-1786.

2001 Publications

  1. Cardoso-Filho,B.J., T.A. Lipo, “Application ofMTO-thyristorsin Current Stiff Converters with Resonant Snubbers,” IEEETransactionson Industry Applications, Mar.-Apr. 2001, vol. 37, iss. 2, pp.566-573.
  2. Welchko,B.A., T.A. Lipo, “A Novel VariableFrequency Three Phase Induction Motor Drive System Using Only ThreeControlled Switches,” IEEE Transactions on IndustryApplications,Nov.-Dec. 2001, vol. 37, iss. 6, pp. 1739-1745.
  3. Ledezma,E., B. McGrath, A.R. Munoz-Garcia, T.A. Lipo, “Dual AC-Drive Systemwith a Reduced SwitchCount,” IEEE Transactions on Industry Applications, Sept.-Oct.2001,vol. 37, iss. 5, pp. 1325-1333.
  4. Stankovic,A.V., T.A. Lipo, “A Novel ControlMethodfor Input Output Harmonic Elimination of the PWM Boost TypeRectifierUnder Unbalanced Operating Conditions,” IEEE Transactions onPowerElectronics, Sept. 2001, vol. 16, no. 5, pp. 603-611.
  5. McGrath,B.P., D.G. Holmes, T.A. Lipo, “Optimised SpaceVector Switching Sequences for Mutilevel Inverters,” IEEEAppliedPower Electronics Conference (APEC) 2001, Anaheim, CA,Mar. 4-8, 2001, vol. 2, pp 1123-9
  6. Suh,Y., P.G. Albano, V. Tijeras, T.A. Lipo, “Unity PowerFactor Control of a Three-pole PWM AC/DC Converter UnderSingle-phaseInput,” Submitted to CPES Annual Meeting, Blacksburg, VA,Apr. 22-25, 2001.
  7. Huang,S., M. Aydin, T.A. Lipo, “ElectromagneticVibrationand Noise Assessment for Surface Mounted PM Machines,” PowerEngineering Society Summer Meeting conference proceedings, 2001,vol. 3,pp. 1417-1426.
  8. Aydin,M., S. Huang, T.A. Lipo, “Optimum Design and3DFinite Element Analysis of Non-slotted and Slotted Internal RotorTypeAxial Flux PM Disc Machines,” Power Engineering Society SummerMeetingconference proceedings, 2001, vol. 3, pp. 1409-1416.
  9. Huang,S., M. Aydin, T.A. Lipo, “Low Noise andSmoothTorque Permanent Magnet Propulsion Motors: Comparison ofNon-slotted andSlotted Radial and Axial Flux Topologies,” Submitted toInternationalAegean Conference of Electrical Machines and Power Electronics,2001,pp.1-8.
  10. Aydin,M., S. Huang, T.A. Lipo, “Design and 3DElectromagnetic Field Analysis of Non-slotted and Slotted TORUSType AxialFlux Surface Mounted Permanent Magnet Disc Machines,”InternationalElectrical Machine and Drive Conference Proceedings, 2001, pp645-651.
  11. Stankovic,A.V., T.A. Lipo, “A GeneralizedControl Method forInput-Output Harmonic Elimination for the PWM Boost Rectifier UnderSimultaneous Unbalanced Input Voltages and Input Impedances,”PESC2001 conference proceedings, 2001, vol. 3, pp. 1309-1314.
  12. Chomat,M., T.A. Lipo, “Adjustable-SpeedDrive withSingle-Phase Induction Machine for HVAC Applications,” PESC2001conference proceedings, 2001, vol. 3, pp. 1446-1451.
  13. Panda,D., E.L. Benedict, G. Venkataramanan, T.A. Lipo, “ANovel Control Strategy For the Rotor Side Control of a Doubly FedInductionMachine,” IEEE IAS Chicago, Oct. 2001, vol. 3, pp. 1695-1702.
  14. Moreira,A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “Modelingand Evaluation of dv/dt Filters for AC Drives with High SwitchingSpeed,”9th European Conference on Power Electronics and Applications,Graz,Austria, Aug 27-29, 2001, CD-ROM.
  15. Moreira,A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “HighFrequency Modeling for Cable and Induction Motor Over-VoltageStudies inLong Cable Drives,” IEEE Industrial Application Society 36thAnnualMeeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 1787-1794.
  16. Welchko,B.A., T.A. Lipo, “Model ReferenceCurrent Control ofa Unipolar Induction Motor Drive,” IEEE Industrial ApplicationSociety36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp.1807-1813.
  17. Luo,J., S. Huang, S. Chen, T.A. Lipo, “Design andExperiments of a Novel Axial FluxCircumferential Current Permanent Magnet (AFCC) Machine with RadialAirgap,”IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL,Sept. 30-Oct 5, 2001, vol. 3, pp. 1989-1996.
  18. Kikuchi,J., T.A. Lipo, “Three Phase PWMBoost-BuckRectifiers with Power Regenerating Capability,” IEEE IASChicago, IL,Sep 30 - Oct 4, 2001. pp. 308-315.IEEEIndustrial Application Society 36th Annual Meeting, Chicago, IL,Sept.30-Oct 5, 2001, pp. 308-315.
  19. Aydin,M., S. Huang, T.A. Lipo, “Torque Quality andComparison of Internal and External Rotor Axial Flux Surface-MagnetDiscMachines,” Industrial Electronics Society, 2001. IECON '01.The 27th Annual Conference ofthe IEEE,Volume 2, 29 Nov.-2 Dec. 2001 Page(s):1428 - 1434 vol.2.Industrial Electronics, IEEETransactions on Volume 53,Issue3,June 2006 Page(s):822 - 830
  20. Chomat,M., T.A. Lipo,Adjustable-SpeedSingle-Phase IM Drive with ReducedNumber of Switches,” IEEE Industrial Application Society 36thAnnualMeeting, Chicago,IL, Sept. 30-Oct 5, 2001,vol. 1, pp.1800-1806.
  21. Park,S-J., J.-W. Ahn, M.-H. Lee, T.A. Lipo, “Novel Encoderfor SRM Drive with High Resolution Switching Angle Control,”2001 IEEEInternational Symposium on Industrial Electronics (ISIE 2001), Pusan South Korea,vol. 3, pp. 1781-1785.
  22. Tapia,J.A.,F. Leonardi, T.A. Lipo, “CPPM: A SynchronousPermanent Magnet Machine with FieldWeakening,” International Agean Conf. On Electrical Machinesand PowerElectronics, Kusadasi, Turkey,June 2001.
  23. Tapia,J.A., F. Leonardi, T.A. Lipo, “Consequent PolePermanent Magnet Machine with Field Weakening Capability,”International Electrical Machines and Drives Conf. (IEMDC),Cambridge, MA,June 17-20, 2001, pp. 126-131.
  24. McGrath,B.P., M. Manjrekar, G. Holmes, T.A. Lipo, “An ImprovedModulation Strategy for a Hybrid Multilevel Inverter,” IEEEAppliedPower Electronics Conference, Mar. 2001.
  25. Yao,J., J. Krase,T.A. Lipo, “DesignConsiderations for Single PhaseInduction Motor Packaged Drives,” CPES Annual Meeting, Apr.2001,CDROM.
  26. Yao,J., T.A. Lipo, “A Novel Soft-SwitchingInverter withZVS-ZCS Features,” IEEE Power Electronics SpecialistsConference,Vancouver, June 17-21, 2001, CDROM, vol. 2, pp. 1141-1146.
  27. Sarlioglu,B., T.A. Lipo, “Nonlinear Analysis andExperimentalResults of Doubly Salient PM Generator,”IEEEAegean Conference on ElectricalMachines and Power (ACEMP), Kusadasi, Turkey,2001.
  28. Huang,S., M. Aydin, T.A. Lipo, “TORUS ConceptMachines:Pre-Prototyping Assessment for Two Major Topologies,” IEEE IASAnnualMeeting Conference Record , Chicago, IL,Oct.2001, pp. 1619-1625.
  29. Wei,L., T.A. Lipo, “A Novel MatrixConverter Topology withSimple Commutation”, IEEE IAS Annual Meeting Conference Record,Chicago, IL,Oct. 2001,vol. 3, pp. 1749-1754.
  30. Lyra,R., T.A. Lipo, “Torque DensityImprovementin a Six-Phase Induction Motor with Third Harmonic CurrentInjection,”IEEE IAS Annual Meeting Conference Record, Chicago, IL,Oct. 2001, vol. 3, pp.1779-1786.

2002 Publications

  1. Moreira,A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “High FrequencyModeling for Cable and InductionMotor Over-Voltage Studies in Long Cable Drives,” IEEETransactions onIndustry Applications, Sept.-Oct. 2002, vol. 38, iss. 5, pp. 1297-1306.
  2. Kikuchi,J., T.A. Lipo, “Three Phase PWMBoost-Buck Rectifiers with Power Regenerating Capability,” IEEETransactions on Industry Applications, Sept.-Oct. 2002, vol. 38,iss. 5,pp. 1361-1369.
  3. Chomat,M., T.A. Lipo,Adjustable-SpeedSingle-Phase IM Drivewith Reduced Number of Switches,” IEEE Transactions on IndustryApplications, May-June, 2003, vol.39, iss. 3, pp.819-825.

4. Consoli, A., G. Scarcella, A. Testa, T.A. Lipo, “Air-GapFlux Position Estimation of Inaccessible Neutral Induction Machines by Zero-Sequence Voltage”, Electric Power Components and Systems, 2002, vol. 30, no. 1, pp. 77-88.

  1. Lipo,T.A., A. Consoli, G. Scarcella, A. Testa, “Air-GapFlux Position Estimation of Inaccessible Neutral Induction Machinesby Zero-SequenceVoltage,” Electric Power Components and Systems, vol. 30, no.1, 2002.pp. 77-88.
  2. Drevensek,D., D. Zarko, T.A. Lipo, “A Study ofSensorlessControl of Induction Motor at Zero Speed Utilizing High FrequencyVoltage Injection,”EPE-PEMC, 2002, Dubrovnik and Cavtat.
  3. Tapia,J.A., F. Leonardi, T.A. Lipo, “Consequent PolePermanent Magnet Machine with Field Weakening Capability,” IEEETransactions on Industry Applications, Nov.-Dec. 2003, vol. 39,iss. 6,pp. 1704-1709.
  4. Lyra,R., T.A. Lipo, “Torque DensityImprovement in aSix-Phase Induction Motor with Third Harmonic Current Injection,”IEEETransactions on Industry Applications, Sept.-Oct. vol. 38, iss. 5,pp. 1351-1360.
  5. Wei,L., Lipo, T.A., Chan, H, “Matrix ConverterTopologies With Reduced Number of Switches,” PESC 2002, June 23-27, 2002, vol. 1, pp57-63.
  6. Suh,Y., V. Tijeras, T. A. Lipo, “A Control Method indqSynchronous Frame for PWM Boost Rectifier under GeneralizedUnbalancedOperating Conditions,” PESC 2002, June, 23-27 2002, pp1425-1430.
  7. Welchko,B., Correa, M., Lipo, T.A., “A Three-LevelMOSFETInverter for Low Power Drives,” IECON 2002, Sevilla, Spain, Nov. 5-8, 2002, vol.2,pp.1276-1272.
  8. Aydin,M., S. Huang, T.A. Lipo, “A New Axial FluxSurfaceMounted Permanent Magnet Machine Capable of Field Control,”IEEE IASAnnual Meeting, Pittsburgh, PA, Oct. 11-19, 2002, vol. 2, pp.1250-1257.
  9. Kieferndorf,F. D. , M.Foerster, T.A. Lipo, “Reduction of DC BusCapacitor Ripple Current with PAM/PWM Converter,” IEEE - IASConference Record, 2002, vol. 4, pp.2371 -2377.
  10. Suh,Y., V. Tijeras, T.A. Lipo, “A Nonlinear Controlofthe Instantaneous Power in dq Synchronous Frame for PWM AC/DCConverterunder Generalized Unbalanced Operating Conditions,” IEEE IASAnnualMeeting, Pittsburgh, PA, Oct. 11-19, 2002, vol. 2, pp. 1189-1196.
  11. Qu,R., T.A.Lipo, “Dual-Rotor,Radial-Flux,Toroidally-Wound, Permanent-Magnet Machines,” IEEE IAS AnnualMeeting,Pittsburgh, PA,Oct. 11-19, 2002,vol. 2, pp. 1281-1288.
  12. Qu,R., T.A.Lipo, “Analysis andModeling of Airgap &Zigzag Leakage Fluxes in a Surface-Mounted-PM Machine,” InProc. ofIEEE 37th IAS Annual Meeting, Pittsburgh,PA,Oct. 13-18,2002,pp.2507-2513.
  13. Tapia,J.A., F. Leonardi, T.A. Lipo, “A Design Procedurefor a PM Machine with Extended Field Weakening Capability,” InProc.of IEEE 37th IAS Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002,vol.3, pp.1928-1935.
  14. Loh,P.C., D.G. Holmes, Y. Fukuta, T.A. Lipo, “ReducedCommon Mode Carrier-Based Modulation Strategies for CascadedMultilevelInverters,” In Proc. of IEEE 37th IAS Annual Meeting,Pittsburgh, PA,Oct. 13-18, 2002, vol. 3, pp.2002-2009.
  15. Loh,P.C., G.H. Bode, D.G. Holmes, T.A. Lipo, “ATime-Based Double Band Hysteresis Current Regulation Strategy forSingle-Phase Multilevel Inverters,” In Proc. of IEEE 37th IASAnnualMeeting, Pittsburgh, PA, Oct, 13-18, 2002, vol. 3, pp.1994-2001.
  16. Suh,Y-S., V. Tijeras, T.A. Lipo, “Unity Power FactorControl of a Three-Pole PWM AC/DC Converter Under Single-phaseInput,”IEEE Power Electronics Specialists Conference, June 2002 (in CDROM).
  17. Drevensek,D., D. Zarko, T.A. Lipo, “A Study of SensorlessControlof Induction Motor at Zero Speed Utilizing High Frequency VoltageInjection,” EPE Power Electronics and Motion ControlConference,Dubrovnik Croatia, Sept. 2002, in CD ROM.
  18. Qu,R., J. Luo, S. Huang, T.A. Lipo, “ExperimentalEvaluation of a Two-Phase Axial Flux Circumferential Current (AFCC)Permanent Magnet Machine,” EPE Power Electronics and MotionControlConference, Dubrovnik Croatia,Sept. 2002, in CD ROM.
  19. Huang,S., M. Aydin, T.A. Lipo, “A Direct Approach toElectrical Machine PerformanceEvaluation: Torque Density Assessment and Sizing Optimization,”Interenational Conf. On Electrical Machines (ICEM), Belguim, Sept.2002,in CD ROM.
  20. Lyra,R., T. A. Lipo,TorqueDensity Improvement in a Six-phase Induction Motor with ThirdHarmonicCurrent Injection,” IEEE Transactions on Industry Applications,Sept.-Oct. 2002, vol. 38, no. 5, pp 1351-1360.

2003 Publications

  1. Alan,I., Lipo, T.A., “Induction MachineBased Flywheel EnergyStorage,” IEEE Transactions on Aerospace and ElectronicSystems, Jan2003, vol. 39 iss. 1, pp.151 -163.
  2. Qu,R., T.A.Lipo, “Dual-Rotor,Radial-Flux,Toroidally-Wound, Permanent-Magnet Machines,” IEEE TransactionsonIndustry Applications, Nov.-Dec. 2003, vol.39, iss.6, pp.1665-1673.
  3. Loh,P.C., G.H. Bode, D.G. Holmes, T.A. Lipo, “A Time-BasedDouble Band Hysteresis CurrentRegulation Strategy for Single-Phase Multilevel Inverters,”IEEETransactions on Industry Applications, vol. 39 , iss. 3 , May-June2003,pp. 883–892.
  4. Loh,P.C., D.G. Holmes, Y. Fukuta, T.A. Lipo, “A ReducedCommon Mode Hysteresis Current Regulation Strategy for MultilevelInverters,” APEC 2003 Conference, Miami Beach, FL, Feb. 9-13,2003,vol.1, pp 576 – 582.
  5. Welchko,B.A.,T.A. Lipo, T.M. Jahns, S.E.Schulz, “FaultTolerant Three-Phase AC Motor DriveTopologies; A Comparison of Features, Cost, and Limitations,”IEEEInternational Electric Machines and Drives Conference (IEMDC),Madison,WI, June 1-4, 2003, vol.1, pp.539-546.
  6. Qu,R., T.A. Lipo, “General Closed-formAnalyticalExpressions of Air-gap Inductances for Surface-mounted PermanentMagnetand Induction Machines,” IEEE International Electric MachinesandDrives Conference (IEMDC), Madison, WI, June 1-4, 2003,vol.1,pp.443-448.
  7. Tapia,J. A., M. Aydin, S. Huang, T. A.Lipo, “SizingEquation Analysis for Field Controlled PMMachines: A Unified Approach,” IEEE International ElectricMachinesand Drives Conference (IEMDC), Madison, WI, June 1-4, 2003,vol.2,pp.1111-1116.
  8. Wei,L., Y. Matsushita, T.A. Lipo, “Investigation ofDual-bridge Matrix Converter Operation under Unbalanced SourceVoltages,”IEEEPower Electronics SpecialistsConference (PESC), Acapulco, Mexico ,June 15-19, 2003,vol.3, pp.1293-1298.
  9. Wei,L. T.A. Lipo, H. Chan, “Robust VoltageCommutationof Conventional Matrix Converter,” IEEEPowerElectronics Specialists Conference(PESC), Acapulco, Mexico, June 15-19, 2003, pp.717-722.
  10. Stumberger,G., D.Zarko, M. T. Aydemir, T.A. Lipo, “Design of aLinear Bulk Superconductor Magnet Synchronous Motor forElectromagneticAircraft Launch Systems,” IEEE International Electric MachinesandDrives Conference (IEMDC), Madison, WI, June 1-4, 2003, vol.1,pp.494-500., IEEE Transactions on Applied Superconductivity, Mar.2004,vol.14, no. 1, pp. 54-62.
  11. Aydin,M., S. Huang, T.A. Lipo, “PerformanceEvaluation ofAn Axial Flux Consequent Pole PM Motor Using Finite ElementAnalysis,”IEEE International Electric Machines and Drives Conference (IEMDC),Madison, WI,June 1-4, 2003,vol.3, pp.1682-1687.
  12. Qu,R., M.Aydin, T.A.Lipo, “PerformanceComparison ofDual-Rotor Radial-Flux and Axial-Flux Permanent-Magnet BLDCMachines,”IEEE International Electric Machines and Drives Conference (IEMDC),June 1-4, 2003,Madison, WI,vol.3, pp.1948-1954.
  13. Sung,J.W., C.W. Lee, J.C.Yang, D.U. Kim, G.S. Kim, T.A. Lipo, C.Y. Won,S.Choi,“SensorlessControl for Linear Compressors,”International Conference on Mechatronics and Information Technology(ICMIT) Dec. 4-6, 2003, Jecheon, Korea.
  14. Kieferndorf,F., M. Forster, G.Venkataramanan, T.A. Lipo, “CurrentStiff Rectifiers with Reverse Blocking IGBTs and IGBTs with SeriesDiodes,”EPE 2003 Conference, Toulouse, France ,Sept.2-4, 2003.
  15. Aydin,M., R. Qu, T.A. Lipo, “Cogging TorqueMinimizationTechnique for Multiple-Rotor, Axial-Flux, Surface-Mounted-PMMotors:Alternating Magnet Pole-Arcs in Facing Rotors,” IAS 2003 AnnualConference, Salt Lake City, Utah, Oct. 12-16, 2003, vol.1,pp.555-561.
  16. Moreira,A.F., P.M. Santos, T.A. Lipo, G. Venkataramanan, “FilterNetworks for Long Cable Drives and Their Influence on Motor VoltageDistribution and Common-Mode Currents,” Annual Conference ofthe IEEEIndustrial Electronics Society (IECON) 2003, Roanoke, Virginia,Nov. 2-6,2003, pp.2917-2922.
  17. Yao,J., J. Krase, T.A.Lipo, “DesignConsiderations for Motor-controllerIntegration of a Single Phase Induction Motor Packaged Drive,”IEEEInternational Electric Machines and Drives Conference (IEMDC), Madison, WI,June 2-3, 2003,pp.1239-1244.
  18. Qu,R. T.A. Lipo, “Design andOptimization ofDual-Rotor, Radial-Flux, Toroidally-Wound, Permanent-MagnetMachines,”IEEE Industry Applications Society Annual Meeting, Salt Lake City, UT,Oct. 12-16, 2003,vol.2, pp.1397-1404.
  19. Wei,L., T.A. Lipo, “Investigation of9-switchDual-bridge Matrix Converter Operating under Low Output PowerFactor,”IEEE Industry Applications Society Annual Meeting, Salt Lake City, UT,Oct. 12-16, 2003,vol.1,pp.176-181.
  20. Wei,L., Y. Matsushita, T.A. Lipo, “A CompensationMethodfor Dual-bridge Matrix Converters Operating Under Distorted SourceVoltages,” Annual Conference of the IEEE Industrial ElectronicsSociety (IECON) 2003, Roanoke, Virginia, Nov. 2-6, 2003,pp.2028-2084.
  21. Nedic,V., T.A. Lipo, “Low-costCurrent-Fed PMSM DriveSystem with Sinusoidal Input Currents,” IEEE IndustryApplicationsSociety Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003,vol.2,pp.917-924.IEEE Transactions onIndustry Applications, May/June 2006.
  22. Panda,D., T. A. Lipo, “Reduced SwitchCount DoubleConverter Fed Wound Rotor Induction Machine Drive for Wind EnergyApplication,” Electric Machines and Drives Conference 2003.IEMDC'03.IEEE International, Madison, WI,June 1-4, 2003,pp. 1924-1931.
  23. Panda,D., T. A. Lipo, “A Half Power RatingImproved3-Phase Six-Switch Boost Rectifier Using Two Half ControlledConfigurations with a Common DC Bus,” Power ElectronicsSpecialist Conference,2003.PESC'03.IEEE34th Annual Conference on, vol. 3, June 15-19, 2003, Acupulco, NM,pp. 1069-1074.

2004 Publications

  1. Loh,P.C., D.G. Holmes, Y. Fukuta, T.A. Lipo, “A Reduced CommonMode Hysteresis CurrentRegulation Strategy for Multilevel Inverters,” IEEETransactions on PowerElectronics, Jan. 2004, vol. 19, iss. 1, pp. 192-200.
  2. Stumberger,G., D.Zarko, M. T. Aydemir, T.A. Lipo, “Designof a Linear Bulk Superconductor Magnet Synchronous Motor forElectromagnetic Aircraft Launch Systems,” IEEE Transactions onAppliedSuperconductivity, Mar. 2004, vol. 14, iss. 1, pp. 54-62.
  3. Tapia,J., Leonardi, F., T.A. Lipo, “3D FiniteElements Analysis and Experimental Validation for the ConsequentPole PM Machine,”IEEE International Magnetics Conference (INTERMAG), Anaheim, CA,Jan. 5-9, 2004.
  4. Tenca,P., T.A. Lipo, “Synthesis ofDesired ACLine Currents in Current-Sourced DC-AC Converters,” In Proc. ofIEESecond International Conference on Power Electronics Machines andDrives(PEMD), University of Edinburgh, United Kingdon, Mar. 31-Apr. 2,2004.
  5. Welchko,B.A., T.M. Jahns, T.A. Lipo, “Short-Circuit FaultMitigation Methods for Interior PM Synchronous Machine Drives usingSix-Leg Inverters,” Proc. of the IEEE Power ElectronicsSpecialistsConference, PESC'04, Aachen, Germany, June 20-25, 2004.
  6. Lee,K., T.M. Jahns, W. E. Berkopec, T.A. Lipo, “Closed-FormAnalysis of Adjustable Speed Drive Performance Under Input VoltageUnbalance and Sag Conditions,” Proc. of the IEEE PowerElectronicsSpecialists Conference, PESC'04, Aachen, Germany, June 20-25, 2004,pp.469-475, vol. 1.IndustryApplications, IEEE Transactions on Volume: 42Issue:3 May-Jun 2006Page(s): 733-741
  7. Tenca,P., T.A. Lipo, “Reduced CostCurrent-Source TopologyImproving the Harmonic Spectrum Through On-Line FunctionalMinimization,”Proc. of the IEEE Power Electronics Specialists Conference,PESC'04, Aachen, Germany, June 20-25, 2004.
  8. Welchko,B., T.M. Jahns, T.A. Lipo, “Fault InterruptingMethods and Topologies for Interior PM Machine Drives,” EPEPowerElectronics and Motion Control Conference, EPE-PEMC'04, Sept.2004, Riga,Latvia.
  9. Aydin,M., S. Huang, T.A. Lipo, “Axial FluxPermanentMagnet Disc Machines: A Review,” Symposium on PowerElectronics,Electrical Drives, Automation, and Motion (SPEEDAM) 2004, Capri, Italy,June 16-18, 2004.
  10. Welchko,B.A., J. Wai, T. M. Jahns, T. A. Lipo, “Magnet FluxNulling Control of Interior PM Machine Drives for Improved ResponsetoShort-Circuit Faults,” IEEE IAS Annual Meeting, IAS’04, October3-7,2004, Seattle, WA, USA, p. 261-267, vol. 1.
  1. Lipo,T.A., M. Aydin, “Field Weakening ofPermanent MagnetMachines – Design Approaches,” EPE Power Electronics and MotionControl Conference, EPE-PEMC'04, Sept.2004, Riga, Latvia.
  2. Wei,L., T.A. Lipo, “Investigation ofthe Dual BridgeMatrix Converter Operating Under Boost Mode,” EPE PowerElectronicsand Motion Control Conference, EPE-PEMC'04, Sept.2004, Riga,Latvia.
  3. Aydin M., J. Yao, E.Kayikci, S. Huang, and T. A. Lipo,“DesignConsiderations and Experimental Results ofan Axial Flux PM Motor With Field Control,” ICEM, September5-8, 2004,Cracow, Poland
  4. Lipo, T.A., S.M. Madani,R. White, “SoftMagnetic Composites for AC Machines - A FreshPerspective,” Power Electronics and Motion Control Conference,Sept.2-4, 2004, Riga Latvia
  5. Qu,R., T. A. Lipo, “Design andParameter EffectAnalysis of Dual-Rotor, Radial-Flux, Toroidally-Wound,Permanent-MagnetMachines,” IEEE Transactions on Industry Applications, Bol. 40,No. 3,May/June 2004, pp. 771-779
  6. Qu, R., T. A. Lipo, “SizingEquations and Power Density Evaluation of Dual-Rotor, Radial-Flux,Toroidally Wound, Permanent-Magnet Machines,” XVI InternationalConference on Electrical Machines, ICEM 200r, Cracow, Poland, Sept2004.
  7. Suh, Y., T.A. Lipo, “AControl Scheme in Hybrid Synchronous-Stationary Frame for PWM AC/DCConverterunder Generalized Unbalanced Operating Conditions”, IEEE IASAnnualMeeting, IAS'04, 3-7 October, 2004, Seattle, WA, USA IEEETransactions onIndustry Applications May/June 2006

2005 Publications

  1. Tenca,P, T. Lipo, “Conversion Topologyfor ReducingFailure Rate and Life-Cycle Costs of High-Power Wind Turbines,”43rdAerospace Sciences Meeting and Exhibit, 10-13 January 2005, Reno, Nevada.
  2. Ouyang,W., T. A. Lipo, A. EL-Antably, “Analysis of OptimalStator Concentric Winding Patterns Design,” IEMDC '05, 15-18May,2005, San Antonio, TX, USA.
  3. Lee,K., T. M. Jahns, D. W. Novotny, T. A. Lipo, W. E. Berkopec, V.Blasko, “Impactof Inductor Placement on the Performance ofAdjustable Speed Drives Under Input Voltage Unbalance and SagConditions,”IEEE 2005 International Electric Machines and Drives Conference,May 15-182005, San Antonio, TX, USA.
  4. Madani,S. M., T. A. Lipo, C. E. Ni?o, D. Lugo, “Modeling ofa Radial Permanent Magnet Motor with Trapezoidal Shaped Poles,”IEMDC05, San Antonio, May 15 - 18, 2005.
  5. Dufour,C., L. Wei, T. A. Lipo, “Real-TimeSimulation ofMatrix Converter Drives,” European Power Electronics Conference(EPE),Dresden, Germany, September 2005.
  6. Lee, K.,T. M. Jahns, T. A. Lipo, G. Venkataramanan, W. E Berkopek, “Impact of InputVoltage Sag and Unbalance on DC LinkInductor and Capacitor Stress in Adjustable Speed Drives,” 2005IEEEIndustry Applications Society Annual Meeting, 2-6 October 2005, Hong Kong.
  7. Panda,D., T. A. Lipo, “Double Side Controlof Wound RotorInduction Machine for Wind Energy Application Employing HalfControlledConverters,” 2005 IEEE Industry Applications Society AnnualMeeting,2-6 October 2005, Hong Kong
  8. Ouyang,W., S. Huang, A. Good, T. A. Lipo, “ ModularPermanent Magnet Machine Based on Soft Magnetic Composite,”International Conference on Electrical Machines and Systems (ICEMS)2005,September 27-29, 2005, Nanjing, China.
  9. Shin,H. B., J. G. Park, S. K. Chung, H. W. Lee and T. A. Lipo, “GeneralizedSteady-state Analysis of MultiphaseInterleaved Boost Converter with Coupled Inductors,” IEEProc.-Electr.Power Appl., Vol. 152, No. 3, May 2005.
  10. Bird,J., T. A. Lipo, “An ElectrodynamicWheel with aSplit-Guideway Capable of Simultaneously Creating Suspension,Thrust andGuidance Forces,” 8th International Symposium onMagneticSuspension Technology, September 2005, DresdenGermany.
  11. Bird,J., T. A. Lipo, “A Study of theEffect of UsingElectrodynamic Wheels in Series,” 8th InternationalSymposium on Magnetic Suspension Technology, September 2005, Dresden Germany.
  12. Tenca,P., T. A. Lipo, “A CecentralizedProtection Schemefor Converters Utilizing a DC-link Inductor” IECON Conference,31stAnnual Conference of the IEEE Industrial Electronics Society, Nov6-10,2005.

2006 Publications

  1. Garcia,A.M., D.G. Holmes, T.A. Lipo. “Reduction ofBearingCurrents in Doubly Fed Induction Generators.” 2006 IAS AnnualConference. Oct 8-12, 2006, Tampa, FL.
  2. Tenca,P., A.A. Rockhill, T.A. Lipo. “Current-SourceTopology for Wind Turbines Capable of Providing Leading PowerFactor WhileReducing Line Current Harmonics.” 2006 IAS Annual Conference.Oct8-12,2006, Tampa, FL.IEEE Transactions on IndustryApplications.
  3. W.Ouyang, D. Zarko, T.A. Lipo. “Permanent MagnetMachine Design Practice and Optimization.” 2006 IAS AnnualConference.Oct 8-12, 2006, Tampa, FL.

2007 Publications

  1. Lipo,T.A., T. Komatsu, K. Shinohara. “Simulation of aSalient Pole Synchronous Machine with Both Field Pole and StatorCoreSaturation.” Electromotion ‘07, Bordrum, Turkey,Sept. 10-12, 2007.
  2. Lipo,T.A.. “Simulationof a High TemperatureSuperconducting Synchronous Machine with Stator Core Saturation.” AUPEC (Australasian Universities Power Engineering Conference)2007. Perth, Australia.Dec . 10 - 12, 2007.
  3. Tenca,P., A.A. Rockhill, T.A. Lipo. “Low VoltageRide-Through Capability for Wind Turbines based on Current SourceInverterTopologies.” Seventh IEEE International Conference on PowerElectronicsand Drive Systems (IEEE PEDS 2007) November 27-30, 2007, Bangkok, Thailand.



top

2000 Publications

  1. Luo, X., T.A.Lipo, “ASynchronous/Permanent MagnetHybrid AC Machine,” IEEE Transactions on Energy Conversion,June 2000,vol. 15, no. 2, pp 203-210.

2.Sinha, G., T.A. Lipo, “AFour Level Inverter Based Drive With A Passive Front End,” IEEE Transactions on PowerElectronics. Mar. 2000,vol. 15, no. 2, pp 285-294.

3.Kim, S., S.-K. Sul, T.A. Lipo, “AC to AC Power Conversion Based on Matrix Converter Topology with UnidirectionalSwitches,” IEEE Transactions on Industry Applications, Jan.-Feb. 2000, vol. 36, no.1, pp. 139-145.

4.Munoz-Garcia, A., T.A. Lipo, “DualStator Winding Induction Machine Drive,” IEEE Transactions on Industry Applications, Sep-Oct2000, vol. 36, no. 6, pp 1369-79.

5.Jiang, Q., T.A. Lipo, “SwitchingAngles and DC Link Voltages Optimization for Multilevel Cascade Inverters,” Electric-Machines-and-Power-Systems,July 2000, 28(7): 605-12.

6.Toba, A., T.A. Lipo, “GenericTorque-Maximizing Design Methodology of Permanent Magnet Vernier Machine,” IEEE Transactionson Industry Application, Nov.-Dec. 2000, vol. 36, no 6, pp 1539-46.

7.Luo, X., T.A. Lipo, “ASynchronous/Permanent Magnet Hybrid AC Machine,” IEEE Transaction on Energy Conversion, June2000, vol. 15, iss. 2.

8.Lyra, R.O.C., B.J. Cardoso-Filho, V. John, T.A. Lipo, “Co-Axial Current Transformer for Test and Characterization of High PowerSemiconductor Devices Under Hard and Soft-Switching,” IEEE Transactions onIndustry Applications, July-Aug. 2000, vol.36, no.4, pp.1181-1188.

9.Manjrekar, M.D., P. Steimer, T.A. Lipo, “Hybrid Multilevel Power Conversion System: A Competitive Solution for High PowerApplications,” IEEE Transactions on Industry Applications, May-June 2000, vol. 36, no3, pp 834-841.

10.Osama, M., T.A. Lipo, “Experimentaland Finite Element Analysis of an Electronic Pole-Change Drive,” IEEE Transactions onIndustry Applications, Nov.-Dec. 2000, vol. 36, no 6, pp 1637-1644.

11.Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Complementary Half Controlled Three Phase PWM Boost Rectifier for Multi-DC-LinkApplications,” APEC, New Orleans, LA, Feb. 2000, vol. 1, pp. 494-500.

12.Nedic, V., T.A. Lipo, “ExperimentalVerification of Induced Voltage Self-Excitation of a Switched Reluctance Generator,”IEEE/IAS Conference Record, Rome,Italy, Oct. 8-12, 2000,vol. 1, pp51-56.

13.Welchko, B.A., T.A. Lipo, “ANovel Variable Frequency Three Phase Induction Motor Drive System Using Only Three Controlled Switches,” IEEE/IAS Conference Record, Rome,Italy, Oct. 8-12, 2000,vol. 3, pp 1468-1473.

14.Benedict, E.R., T.A. Lipo, “ImprovedPWM Modulation for a Permanent-Split Capacitor Motor,” IEEE/IAS Conference Record, Rome, Italy, Oct. 8-12, 2000, vol.3, pp. 2004-2010.

15.Toba, A., H. Ohsawa, Y. Suzuki, T. Miura, T.A. Lipo, “Experimental Evaluations of the Dual-Excitation Permanent Magnet Vernier Machine,”IPEC Conference Record,Tokyo, Japan, Apr. 3-7, 2000, pp. 1884-1889.

16.Lipo, T.A., “An ImprovedWeighted Total Harmonic Distortion Index for Induction Motor Drives,” OPTIM, Brasov,Romania,2000, vol. 2, pp 311-322.

17.Stankovic, A.V., T.A. Lipo, “ANovel Control Method for Input Output Harmonic Elimination of the PWM Boost Type Rectifier Under UnbalancedOperating Conditions,” APEC, NewOrleans,LA, Feb. 2000, vol. 1, pp. 413-419.

18.Yamamoto, K., T.A. Lipo, K. Shinohara, Y. Sueyoshi, “Power Loss Reduction and Optimum Modulation Index of PWM Inverter with VoltageBooster for Permanent Magnet Synchronous Motor Drive,” IPEC Conference Record,Tokyo,Japan,Apr. 3-7, 2000, vol. 1, pp. 147-152.

19.Consoli, A., G. Scarcella, A. Testa, T.A. Lipo, “Air-Gap Flux Position Estimation of Inaccessible Neutral Induction Machines by ZeroSequence Voltage,” Conference Records for the Symposium on Power Electronics, Electric Machines, & Drives, Italy. July 2000, iss. B1,pp 1-6.

20.Woods, L., A. Homaifar, F. Fatehi, M. Chomat, T. Lipo, “Switching Transients of Low Cost Two Speed Drive for Single-Phase InductionMachine,” CPES Power Electronics Seminar, Blacksburg, VA, Sept. 17-19, 2000, pp78-86.

21.Lipo, T.A., “ElectricMachine Analysis and Simulation,” Wiley Encyclopedia of Electrical and Electronics Engineering, vol. 6, pp.313-324.

22.McGrath, B.P., D.G. Holmes, M. Manjrekar, T.A. Lipo, “An Improved Modulation Strategy For a Hybrid Multilevel Inverter,” IEEE/IASConference Record, Rome, Italy, Oct. 8-12, 2000, vol. 4, pp.2086-2093.

23.Huang, S., M. Aydin, T.A. Lipo, “Comparison of(Non-Slotted and Slotted) Surface Mounted PM Motors and Axial Flux Motors for SubmarineShip Drives,” 3rd Naval Symposium on Electrical Machines, 2000.

24.Kim, S., E. Benedict, F. Fatehi, , N. Patel, A. Homaifar, T.A Lipo, “Adjustable Speed Drive Control Based on Random Pulse Width Modulation,” CPESAnnual Meeting, Apr. 2000, pp. 202-209.

25.Chomat, M., T.A. Lipo, “TwoSwitch Adjustable-Speed Drive with Single-Phase Induction Machine”, CPES Annual Meeting, Apr. 2000, pp. 381-385.

26.Alan, I., T.A. Lipo, “Starter/GeneratorEmploying Resonant-Converter-fed Induction Machine, Part I: Analysis,” IEEE Transactions on Aerospace and Electronic Systems, Oct. 2000, vol. 36,no. 4, pp. 1309-1318.

27.Alan, I., T.A. Lipo, “Starter/GeneratorEmploying Resonant-Converter-fed Induction Machine, Part II: Hardware Prototype”, IEEETransactions on Aerospace and Electronic Systems, Oct. 2000, vol. 36, no. 4, pp. 1319-1329.

27. Lipo, T.A., “ConverterTopologies for Induction Motor Drives,” Modern Electrical Drives 2000, pp. 273-288.